[Olsr-users] olsrd2 lan_import plugin

[nemesis]

 On Tue, 24 May 2016 14:10:11 +0200, Henning Rogge <(spam-protected)> 
 wrote:
> On Tue, May 24, 2016 at 12:55 PM, nemesis <(spam-protected)> wrote:
>> Hi,
>
> Hi...
>
>> are there examples of a working OpenWRT UCI configuration for the 
>> OLSRd2
>> lan_import plugin?
>>
>> After a few initial attempts in which I though I configured it 
>> correctly, I
>> now see that my configuration is not triggering olsrd2 to advertise 
>> the
>> route to the rest of the network.
>
> As the wiki entry says, the lan_import sections in the configuration
> MUST define a name.
>
> I would try something like this:
>
>> config lan_import
>>         list name '1'
>>         list interface 'eth0'
>
> Sorry, physical interface name necessary. Not my fault, I have yet to
> find a good way to do it differently for other parameters as a 
> section
> name.
>
> '1' can be any kind of string... which also allows you to define
> multiple lan_import sections.

 Thank you, it works with "br-lan".

 Federico