[Olsr-users] Configuration for olsrd.conf

[Henning Rogge]

Hi,

we have running a lot of 12.09 openwrt devices at our institute and
never had trouble with iptables... I would NOT suggest to go back to a
version more than 4 years old.

Maybe you should ask about the problem on an OpenWRT mailing list.

Henning Rogge

On Sun, Mar 2, 2014 at 4:16 AM, ANDERSON JUNIOR GADO DA SILVA
<(spam-protected)> wrote:
> hello, Chris W. and Henning Rogge, after several attempts I found where the
> problem was, the 3.8.x kernel openwrt 12.x (this package
> http://downloads.openwrt.org/attitude_adjustment/12.09/ar71xx/generic/openwrt-ar71xx-generic-tl-wr1043nd-v1-squashfs-factory.bin)
> is in serious trouble in the iptables modules, including the nat and filter,
> then actually would never work, I downloaded the version of svn trunk
> compiled a new binary and it worked, just not tested it is working on other
> routers, but already took a big step today in the morning back to work on
> it, I'm thinking instead of version 12.x back to 8:09, do you have any
> suggestions?
>
> thanks for calm that had friends with me.
>
> Att
> Anderson Junior
>
>
> 2014-03-01 14:42 GMT-04:00 ANDERSON JUNIOR GADO DA SILVA
> <(spam-protected)>:
>
>> ok, I changed to the 172.11.0.1/24 lan, still did not result, do not know
>> if pass something in your message, do not speak English, to using google
>> translator ...
>>
>> Att
>> Anderson Junior
>>
>>
>> 2014-03-01 14:11 GMT-04:00 Chris W. <(spam-protected)>:
>>
>>>
>>>> ok thanks for the feedback, let it
>>>> Concerning the mask 255.255.0.0 is a TA in that class and so far I have
>>>> not changed, but soon it'll network.
>>>
>>> It is overlapping the LAN's 192.168.1.x ...
>>>
>>>
>>>>
>>>> regarding vlan, I did not change this pattern that comes with the
>>>> openwrt for this router model but suggest me if I change something, I'll
>>>> comment on that vlan to see if it makes a difference.
>>>
>>> Vlan is right I guess, now when looking at it again ;)
>>>
>>>
>>>>
>>>> when the wlan router the other is that the moment they were off, but now
>>>> I'm sending a new output from echo command '/ all' | nc localhost 2006
>>>> here is:
>>>>
>>>> echo '/all' | nc localhost 2006
>>>
>>>
>>> [...]
>>>
>>> Meshing well, only the routers' LANs need to be announced via HNA entry
>>> to bring the connected machines into play.
>>>
>>>>
>>>> Table: HNA
>>>> Destination     Gateway
>>>> 0.0.0.0/0 <http://0.0.0.0/0>       10.5.0.1
>>>>
>>>>
>>>> Att
>>>> Anderson Junior
>>>>
>>>>
>>> [...]
>>>
>>> greetings,
>>> C
>>
>>
>
>
>
> --
>
>