[Olsr-users] Configuration for olsrd.conf
ANDERSON JUNIOR GADO DA SILVA
Sun Mar 2 04:16:37 CET 2014
hello, Chris W. and Henning Rogge, after several attempts I found where the
problem was, the 3.8.x kernel openwrt 12.x (this package
is in serious trouble in the iptables modules, including the nat and
actually would never work, I downloaded the version of svn trunk compiled a
new binary and it worked, just not tested it is working on other routers,
but already took a big step today in the morning back to work on it, I'm
thinking instead of version 12.x back to 8:09, do you have any suggestions?
thanks for calm that had friends with me.
2014-03-01 14:42 GMT-04:00 ANDERSON JUNIOR GADO DA SILVA <
> ok, I changed to the 22.214.171.124/24 lan, still did not result, do not know
> if pass something in your message, do not speak English, to using google
> translator ...
> Anderson Junior
> 2014-03-01 14:11 GMT-04:00 Chris W. <(spam-protected)>:
>> ok thanks for the feedback, let it
>>> Concerning the mask 255.255.0.0 is a TA in that class and so far I have
>>> not changed, but soon it'll network.
>> It is overlapping the LAN's 192.168.1.x ...
>>> regarding vlan, I did not change this pattern that comes with the
>>> openwrt for this router model but suggest me if I change something, I'll
>>> comment on that vlan to see if it makes a difference.
>> Vlan is right I guess, now when looking at it again ;)
>>> when the wlan router the other is that the moment they were off, but now
>>> I'm sending a new output from echo command '/ all' | nc localhost 2006
>>> here is:
>>> echo '/all' | nc localhost 2006
>> Meshing well, only the routers' LANs need to be announced via HNA entry
>> to bring the connected machines into play.
>>> Table: HNA
>>> Destination Gateway
>>> 0.0.0.0/0 <http://0.0.0.0/0> 10.5.0.1
>>> Anderson Junior
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Olsr-users