[Olsr-users] Configuration for olsrd.conf

[ANDERSON JUNIOR GADO DA SILVA]

Hello, researching more about the ad-hoc mode, it does not support so I
need to configure a bridge ip to it, I have done that and now I'm
conceguindo access the radio and also dribbling it, knowing now that he does
not accept bridge'm looking for an outlet for the mac computer that will
make the connection arrives on the server because the authentication is via
PPPoE, I'm still very confused but already beginning to understand, you have
any suggestions for the network topology?

Att
Anderson Junior


2014-02-27 4:07 GMT-04:00 Henning Rogge <(spam-protected)>:

> On 02/26/2014 08:58 PM, ANDERSON JUNIOR GADO DA SILVA wrote:
> > Good afternoon, I was in doubt if I should start a new conversation so
> > I'm posting here again.
> >
> > without making any changes to the file connected the router and
> > connected directly to link a computer in wireless ad-hoc wireless, but
> > when I'm by wireless concigo not ping even access the router, only when
> > connected directly by cable, any hint is well Welcome.
>
> Even before you start the routing daemon you should be able to ping your
> direct neighbors. If this doesn't work your wifi/interface configuration
> is bugged.
>
> So I would advise to test the connectivity of your network without olsrd
> first.
>
> See http://www.olsr.org/mediawiki/index.php/First_Mesh_Troubleshooting
>
> Henning Rogge
>
>
> --
> Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
> Kommunikation, Informationsverarbeitung und Ergonomie FKIE
> Kommunikationssysteme (KOM)
> Fraunhofer Straße 20, 53343 Wachtberg, Germany
> Telefon +49 228 9435-961,   Fax +49 228 9435 685
> mailto:(spam-protected) http://www.fkie.fraunhofer.de
>
>
> --
> Olsr-users mailing list
> (spam-protected)
> https://lists.olsr.org/mailman/listinfo/olsr-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20140227/865bad35/attachment.html>