[Olsr-users] Routing-Problem | olsr.org - 0.6.0 | weight | etx_ff | mode ether

[Michel Blais]

Use a rules to set a mark on udp port 698 and set priority for this
mark with tc.

I don't think it would really give result without a queue with max
bandwith lower than the link can support to be sure the're no paquet
lost on the link. You have to make sure than no paquet is lost on the
link, only unpriorize paquet droped by the router to not overload the
link.

Le 29 mars 2012 21:35, Érico Porto <(spam-protected)> a écrit :
> Hey Markus,
>
> Do you mean using TC? I got curious, how does the OLSR traffic stands from
> the regular traffic? (so I can apply a rule to give it bigger priority)
>
> Érico V. Porto
>
>
> On Thu, Mar 29, 2012 at 9:04 PM, Markus Kittenberger
> <(spam-protected)> wrote:
>>
>>
>> On Thu, Mar 29, 2012 at 9:40 PM, Michel Blais <(spam-protected)>
>> wrote:
>>>
>>> This often happen when the're no traffic on A link and b link have some
>>> paquet lost.
>>>
>>> If paquet lost for B link is too much and cost more then 3 then it will
>>> try link A. If the're no traffic on link B then cost come back to 2 so it
>>> goes back to B.
>>
>>
>> imho first to do do solve/minimize this "flapping" problem, is priorizing
>> olsrd traffic so it gets as least as possible affected by packetloss due to
>> congestion on your links,..
>>
>> Markus
>>
>>
>> --
>> Olsr-users mailing list
>> (spam-protected)
>> https://lists.olsr.org/mailman/listinfo/olsr-users
>
>