[Olsr-users] IPv6 failure

[Glenn Daneels]

Hi,

I'm trying to use OLSRd in IPv6 mode, but this is not working for me.
I tried to enable OLSRd via the /etc/olsrd.conf file and getting the output
in [1].

Especially this part concerns me:


   1. Warning, niit4to6 device is not available, deactivating NIIT
   2. Added :: to IP deny set
   3. Added ::1 to IP deny set
   4.
   5.  ---- Interface configuration ----
   6.
   7. Checking eth5:
   8.         Not a wireless interface
   9. No interfaces detected! This might be intentional, but it also might
   mean that your configuration is fubar


Does niit4to6 need to be available for the ipv6 mode to work?
And why does it say that is does not detects interfaces? eth5 is the
interface it should detect, which it clearly does, but is it trying to only
finding wireless ifaces? And why would he do this?

And although there are two OLSRd nodes which are connected to each other,
OLSRd does not seem to find the other node; it keeps polling, but does not
find anything:

 Scheduler started - polling every 0.050000 ms

Does anyone have any ideas?

Thanks in advance,
Glenn

[1] http://pastebin.com/6GTjvVYs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20121205/dce5169b/attachment.html>