[Olsr-users] IPv6 failure
Thu Dec 6 09:16:30 CET 2012
Please post your olsrd.conf file otherwise we cannot give help.
Make sure eth5 has a valide global IPv6 address. Also site local
address should be fine. Link local address is not enough
2012/12/5 Glenn Daneels <(spam-protected)>:
> I'm trying to use OLSRd in IPv6 mode, but this is not working for me.
> I tried to enable OLSRd via the /etc/olsrd.conf file and getting the output
> in .
> Especially this part concerns me:
> Warning, niit4to6 device is not available, deactivating NIIT
> Added :: to IP deny set
> Added ::1 to IP deny set
> ---- Interface configuration ----
> Checking eth5:
> Not a wireless interface
> No interfaces detected! This might be intentional, but it also might mean
> that your configuration is fubar
> Does niit4to6 need to be available for the ipv6 mode to work?
> And why does it say that is does not detects interfaces? eth5 is the
> interface it should detect, which it clearly does, but is it trying to only
> finding wireless ifaces? And why would he do this?
> And although there are two OLSRd nodes which are connected to each other,
> OLSRd does not seem to find the other node; it keeps polling, but does not
> find anything:
> Scheduler started - polling every 0.050000 ms
> Does anyone have any ideas?
> Thanks in advance,
>  http://pastebin.com/6GTjvVYs
> Olsr-users mailing list
More information about the Olsr-users