[Olsr-users] OLSRD routing table problem.

Philip Hugg (spam-protected)
Tue Oct 4 14:24:34 CEST 2011

On 04/10/2011 8:08 AM, Henning Rogge wrote:
> On Tue, 04 Oct 2011 14:00:43 Philip Hugg wrote:
>> Hello all,
>> I'm currently running olsrd on 3 nodes on an emulator (CoreEmu). The
>> nodes are labelled as N1(, N11(, and N21(
>> When I hit the start button on the emulator, the 3 nodes virtually start
>> at the same time in the order N1, N11, and N21. At this point the 3 nodes
>> converge to a 1-hop all informed network.
>> The problem I'm seeing is sometimes N21 ( and sometimes N11) has routing
>> table entry that is not consistent with it's olsr neighbor table.
>> Below is the output from n21 after it has converged and has stabilized
>> (about 5 minutes into the emulation).
> Switch on ETX, the non-ETX case might be broken (nobody ever has used it in
> years).
> Henning Rogge
Hello Henning,

 From what I understand about ETX.
If I turn it on, then OLSRD is not actually compliant with the RFC.
Is this true?


Phil Hugg

Systèmes et technologies des réseaux
Centre de recherche sur les communications Canada

Network Systems&  Technologies
Communications Research Centre Canada

Tél/Tel:613-949-4464   Téléc/Fax:613-998-9648
(spam-protected)        www.crc.ca

More information about the Olsr-users mailing list