[Olsr-users] OLSRD routing table problem.
Tue Oct 4 14:08:56 CEST 2011
On Tue, 04 Oct 2011 14:00:43 Philip Hugg wrote:
> Hello all,
> I'm currently running olsrd on 3 nodes on an emulator (CoreEmu). The
> nodes are labelled as N1(10.0.0.1), N11(10.0.0.11), and N21(10.0.0.21).
> When I hit the start button on the emulator, the 3 nodes virtually start
> at the same time in the order N1, N11, and N21. At this point the 3 nodes
> converge to a 1-hop all informed network.
> The problem I'm seeing is sometimes N21 ( and sometimes N11) has routing
> table entry that is not consistent with it's olsr neighbor table.
> Below is the output from n21 after it has converged and has stabilized
> (about 5 minutes into the emulation).
Switch on ETX, the non-ETX case might be broken (nobody ever has used it in
Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
Kommunikation, Informationsverarbeitung und Ergonomie FKIE
Neuenahrer Straße 20, 53343 Wachtberg, Germany
Telefon +49 228 9435-961, Fax +49 228 9435 685
GPG: E1C6 0914 490B 3909 D944 F80D 4487 C67C 55EC CFE0
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 4364 bytes
Desc: not available
More information about the Olsr-users