[Olsr-users] IPv6 on OLSR

[Gioacchino Mazzurco]

yes olsrd work very well with ipv6 we are using it in ninux.org in Sicily
and Pisa

we are using olsrd 6 +niit +our autoconfiguration package
here you can find our code and very little wiki
http://gitorious.org/eigennet

2010/9/4 Mehdi Bezahaf <(spam-protected)>

> Hi Soares,
>
> olsrd works also very well with IPv6 ;-). Two points:
> 1- Check if your interface is up and has a global IPv6 address
> 2- You have to check the olsrd configure file "/etc/olsrd.conf". You must
> have these line:
> IPVERSION 6
> instead of:
> IPVERSION 4
>
> In your case it seems that your interface is down!!! (ifconfig wlan0 up)
>
> Regards,
> Mehdi.
>
> -------------------------
> Mehdi Bezahaf,
> PhD Student
>
> University Pierre and Marie Curie
> LIP6/CNRS - Networks & Performance
> Tel.: +331 4427 8775
> Office 119,
> 4, Place Jussieu
> 75005 Paris
> -------------------------
>
> On Sep 3, 2010, at 8:09 PM, FlaNKoUTt Soares wrote:
>
> Hello,
>
> me and my colleague have a MANET running olsrd 0.6.0. It is fully working
> with IPv4. Now we want to put IPv6 on it. But we are having some problems on
> knowing how it is done.
>
>
>  ---- Interface configuration ----
>
> Checking wlan0:
>     Wireless interface detected
> No interfaces detected! This might be intentional, but it also might mean
> that your configuration is fubar.
> I will continue after 5 seconds...
> OLSR encountered multiple problems on startup, which should delay startup
> by 11 seconds.
> As this is quite much time, OLSR will sleep only 5 seconds.
> BUT YOU SHOULD FIX ABOVE PROBLEMS!
> Using 'etx_ff' algorithm for lq calculation.
> -- ALL PLUGINS LOADED! --
>
> Main address: ::
>
> Scheduler started - polling every 0.050000 ms
> ^CReceived signal 2 - shutting down
> Deleting all routes...
> Closing sockets...
> Closing plugins...
> Restoring network state
> Free all memory...
>
>  <<<< olsr.org - 0.6.0 - terminating >>>>
>            http://www.olsr.org
>
>
>
> It appears that olsrd can't detect our wlan0 interface and we don't know
> why because it's fully working.
>
> We will really appreciate an answer to our problem.
>
> Best regards --
> Olsr-users mailing list
> (spam-protected)
> http://lists.olsr.org/mailman/listinfo/olsr-users
>
>
>
> --
> Olsr-users mailing list
> (spam-protected)
> http://lists.olsr.org/mailman/listinfo/olsr-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20100904/b1acf9fb/attachment.html>