[Olsr-users] AHCP

[Outback Dingo]

all my access points, gateways and repeaters autoconfigure themselves with
ip addresses, its actually not that difficult to accomplish

On Fri, Jan 23, 2009 at 7:01 PM, Derek C <(spam-protected)> wrote:

> Hi Benjamin and all,
>
> Actually is anyone using any kind of auto-configuration of the AdHoc MESH
> IP address or is everyone (like me) using static addressing?
>
> At least I control the boxes I'm putting out so I can pick the IP
> addresses - but how to you manage it in a community Freifunk type system?
>
> Derek
>
>
> On Fri, January 23, 2009 10:44 am, Benjamin Henrion wrote:
> > Hi,
> >
> >
> > Does someone has already tried this:
> >
> >
> > http://www.pps.jussieu.fr/~jch/software/ahcp/<http://www.pps.jussieu.fr/%7Ejch/software/ahcp/>
> >
> >
> > "AHCP is an autoconfiguration protocol for IPv6 and dual-stack
> > IPv6/IPv4 networks designed to be used in place of router discovery
> > and DHCP on networks where it is difficult or impossible to configure a
> > server within every link-layer broadcast domain, for example mobile
> ad-hoc
> > networks.
> >
> > AHCP will automatically configure the IPv6 prefix, an IPv4 address for
> > every host, the routing protocol, the DNS server and the NTP server. It
> is
> > currently able to configure hosts for static routing, for use of the OLSR
> > protocol, or for use of the Babel protocol. AHCP is extensible, so adding
> > support for other routing protocols should be easy. "
> >
> > --
> > Benjamin Henrion <bhenrion at ffii.org>
> > FFII Brussels - +32-484-566109 - +32-2-4148403
> >
> >
> > --
> > Olsr-users mailing list
> > (spam-protected)
> > http://lists.olsr.org/mailman/listinfo/olsr-users
> >
> >
>
>
> --
> --
> Derek C
> In Ireland
>
>
>
> --
> Olsr-users mailing list
> (spam-protected)
> http://lists.olsr.org/mailman/listinfo/olsr-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20090123/9bcebeb2/attachment.html>