[Olsr-users] AHCP

[Derek C]

Hi Benjamin and all,

Actually is anyone using any kind of auto-configuration of the AdHoc MESH
IP address or is everyone (like me) using static addressing?

At least I control the boxes I'm putting out so I can pick the IP
addresses - but how to you manage it in a community Freifunk type system?

Derek


On Fri, January 23, 2009 10:44 am, Benjamin Henrion wrote:
> Hi,
>
>
> Does someone has already tried this:
>
>
> http://www.pps.jussieu.fr/~jch/software/ahcp/
>
>
> "AHCP is an autoconfiguration protocol for IPv6 and dual-stack
> IPv6/IPv4 networks designed to be used in place of router discovery
> and DHCP on networks where it is difficult or impossible to configure a
> server within every link-layer broadcast domain, for example mobile ad-hoc
> networks.
>
> AHCP will automatically configure the IPv6 prefix, an IPv4 address for
> every host, the routing protocol, the DNS server and the NTP server. It is
> currently able to configure hosts for static routing, for use of the OLSR
> protocol, or for use of the Babel protocol. AHCP is extensible, so adding
> support for other routing protocols should be easy. "
>
> --
> Benjamin Henrion <bhenrion at ffii.org>
> FFII Brussels - +32-484-566109 - +32-2-4148403
>
>
> --
> Olsr-users mailing list
> (spam-protected)
> http://lists.olsr.org/mailman/listinfo/olsr-users
>
>


-- 
--
Derek C
In Ireland