[Olsr-users] OLSR routing (howto?)

[Sven-Ola Tuecke]

Yep. It's RTFM. Anncouning HNA0/0 basically says "internet here!". And the 
dyngw will automate this, so you don't have to put in HNA0/0 manually but 
rather anncounced if a functional default route exists.

// Sven-Ola

""Derek C"" <(spam-protected)> schrieb im Newsbeitrag 
news:(spam-protected)
> Hi all,
>
> I've got OLSRd running on two test boards (one active radio card per
> board).  Something good is happening - I have the httpinfo module loaded
> and I can view the links between the two boards via the "Links/Topology"
> page.
>
> I haven't worked out routing yet though.  On the "Routes" page nothing 
> shows.
>
> On the 1st board I have a default route set (route via the ethernet port)
> and its got access to the Internet fine.
>
> On both olsrd configuration I have "0.0.0.0   0.0.0.0" in the Hna4 section
> (as well as my local 1.6.XXX.XXX network which seems wrong as it would be
> covered by the 0.0.0.0 entry?).
>
> I also have the olsrd_dyn_gw plugin loaded.
>
> Sorry about this as I'd say my routing problem is probably an RTFM issue
> but thanks for any advice!
>
> Derek
>
>
> -- 
> --
> Derek C
> In Ireland
>
>
>
> -- 
> Olsr-users mailing list
> (spam-protected)
> http://lists.olsr.org/mailman/listinfo/olsr-users