[OLSR-users] Configuring MANET Routers
Ben McCarthy
(spam-protected)
Fri May 4 20:49:51 CEST 2007
Hi Patrick,
No this isn't what I was meaning sorry, what I meant was:
If you have two MANET nodes connected to one another directly and sharing
routes using OLSRd, and they each have a number of hosts attached to them
that aren't taking part in the OLSR exchange (i.e. they are normal hosts) as
follows..
192.168.1.2 192.168.2.2
[Fixed Host 1] [Fixed Host 3]
- -
- -
192.168.1.1 -[MR 1]-------[MR 2]- 192.168.2.1
- -
- -
[Fixed Host 2] [Fixed Host 4]
192.168.1.3 192.168.2.3
Can MR 1 and MR 2 share their network prefixs 192.168.1 and 192.168.2 so
that Fixed Host 1 can send packets to Fixed Host 3 via MR 1 and in turn MR 1
will have a route to Fixed Host 3 because it will forward them towards MR
2's prefix. At present my MRs any swap their exact addresses so any hosts
behind the MR can't be reached.
Sorry for being ambiguous in my first mail.
Thanks,
Ben
> -----Original Message-----
> From: (spam-protected) [mailto:(spam-protected)] On
> Behalf Of Patrick McCarty
> Sent: 04 May 2007 17:35
> To: OLSR discussion and development
> Subject: Re: [OLSR-users] Configuring MANET Routers
>
> Ben,
>
> If I understand your question correctly, then yes, it can do that.
>
> Does this diagram represent what you are attempting?
>
> [Net A] <---> [Router A] <-- LOCAL SUBNET --> [Router B] <---> [Net B]
>
>
> If both Routers are running olsr, they can advertise their other
> routes and make them available to the other network.
>
> Check out the HNA directive in the conf file, and configure each
> router to know about "it's own" routes. That information will be
> distributed to other nodes participating in the MANET.
>
> -- patrick
>
> On 5/4/07, Ben McCarthy <(spam-protected)> wrote:
> >
> >
> >
> >
> > Hi,
> >
> >
> >
> > I have a testbed running OLSRd between hosts and I am now interested to
> > determine whether OLSRd can support networks as MANET nodes (i.e. route
> > using prefixes rather than just single addresses).
> >
> >
> >
> > If so please can you advise me how to configure this functionality?
> >
> >
> >
> > Thanks,
> >
> >
> >
> > Ben
> > _______________________________________________
> > olsr-users mailing list
> > (spam-protected)
> > https://www.olsr.org/mailman/listinfo/olsr-users
> >
> >
>
> _______________________________________________
> olsr-users mailing list
> (spam-protected)
> https://www.olsr.org/mailman/listinfo/olsr-users
More information about the Olsr-users
mailing list