AW: [OLSR-users] olsrd doesnt add routes

[Sven-Ola Tuecke]

Tony,

looks good and should work. We have plenty of witnesses that confirm: Should 
work. Are you in the same universum? Have you tried to "tcpdump -ni eth2 
udp" so far? Does "ping -b 104.255.255.255" work? Is it the same BSSID on 
"iwconfig eth2"?

Sorry, no more easy tipps on the checklist.

Sven-Ola

""Tony Stüker"" <(spam-protected)> schrieb im Newsbeitrag 
news:(spam-protected)
im sorry, but it doesnt work...

i have no iptables or other firewall installed

my network settings are correct (exactly the same are working in windows
with olsr switch)

eth2      Protokoll:Ethernet  Hardware Adresse 00:12:F0:97:34:0A
          inet Adresse:104.13.0.123  Bcast:104.255.255.255  Maske:255.0.0.0

configfile:

DebugLevel              0
IpVersion               4
AllowNoInt              yes
Pollrate                0.5
TcRedundancy            2
MprCoverage             3
LinkQualityWinSize      18
LinkQualityLevel 2
UseHysteresis no
Interface "eth2"
{
        HelloInterval           5.0
        HelloValidityTime       90.0
        TcInterval              15.0
        TcValidityTime          90.0
        MidInterval             15.0
        MidValidityTime         90.0
        HnaInterval             15.0
        HnaValidityTime         90.0
        Ip4Broadcast 104.255.255.255
}

schleppi ~ # md5sum
olsrd-current/src/unix/ifnet.c

1899ce6eab3601d504922d70c5b615dc  olsrd-current/src/unix/ifnet.c

md5 is matching too

i deleted the olsr-current dir and downloaded it from cvs and recompiled
it, no change :(

i was trying around many hours :(

Sven-Ola Tuecke wrote:

> Ah - and in case of newbie errors: Check your netmask as well as the 
> interface config line in /etc/olsrd.conf. "tcpdump -ni [yourwlanif] udp" 
> helps too...
>
> LG Sven-Ola
>
> ""Sven-Ola Tuecke"" <(spam-protected)> schrieb im Newsbeitrag 
> news:ditf6k$5aq$(spam-protected)
>
>> Hey,
>>
>> as I pointed out: Recompile. Verify your src/unix/ifnet.c, Line 903. 
>> There should be *no* such thing in front of the /*We create one socket 
>> for...*/ comment.
>>
>> ((struct sockaddr_in *)&addrsock)->sin_addr.s_addr =
>> ((struct sockaddr_in *)&ifp->int_addr)->sin_addr.s_addr;
>>
>> The md5sum of src/unix/ifnet.c is 1899ce6eab3601d504922d70c5b615dc. Do a 
>> "make clean;make clean_libs" first. Then make, make libs, make install, 
>> make install libs. If this does not help do a "man iptables" and 
>> "iptables -L -n -v".
>>
>> LG Sven-Ola
>>
>> ""Tony Stüker"" <(spam-protected)> schrieb im Newsbeitrag 
>> news:(spam-protected)
>>
>>> interface is up, i can ping and connect to the linksys i am connected to
>>>
>>> cstorch wrote:
>>>
>>>>> it doesnt looks like olsrd is receiving anything
>>>>>
>>>>> schleppi ~ # olsrd -d 0 -nofork -dispin
>>>>>
>>>>> *** olsr.org - 0.4.10-pre ***
>>>>> Build date: Oct 16 2005
>>>>> http://www.olsr.org
>>>>>
>>>>> Parsing file: "/etc/olsrd.conf"
>>>>> READING ACPI
>>>>> READING ACPI
>>>>> READING ACPI
>>>>>
>>>>
>>>> hi, just an idea.
>>>> some new notebooks switch off their wlan antenna to save energy.
>>>> there must be a key combination like "FN" + "F2" or something other.
>>>> try this.
>>>> regards christian
>>>>
>>>>
>>>> _______________________________________________
>>>> olsr-users mailing list
>>>> (spam-protected)
>>>> https://www.olsr.org/mailman/listinfo/olsr-users
>>>>
>>>
>>>
>>> _______________________________________________
>>> olsr-users mailing list
>>> (spam-protected)
>>> https://www.olsr.org/mailman/listinfo/olsr-users
>>
>>
>>
>> _______________________________________________
>> olsr-users mailing list
>> (spam-protected)
>> https://www.olsr.org/mailman/listinfo/olsr-users
>
>
>
> _______________________________________________
> olsr-users mailing list
> (spam-protected)
> https://www.olsr.org/mailman/listinfo/olsr-users



_______________________________________________
olsr-users mailing list
(spam-protected)
https://www.olsr.org/mailman/listinfo/olsr-users