[OLSR-users] Subnetting an OLSR mesh

Dan (spam-protected)
Wed Nov 16 07:29:51 CET 2005


Hi Sven, 

Thanks for your feedback.

In the Berlin mesh, what do you use the x.0.0.0/30 point-to-point links for?
If they are part of your mesh, why not just integrate them into the mesh and
run OLSR over them?  Or are they for VPNs to other meshes elsewhere?

Cheers,

Dan

-------------
View my blog:
http://freenetjazz.blogspot.com

> -----Original Message-----
> From: (spam-protected) [mailto:(spam-protected)] On
> Behalf Of Sven-Ola Tuecke
> Sent: Tuesday, 15 November 2005 17:29
> To: (spam-protected)
> Subject: Re: [OLSR-users] Subnetting an OLSR mesh
> 
> Dan,
> 
> 150 is quite ok for one mesh (see below). Do not fiddle with HNAs for that
> purpose, just use the multi-interface nodes. For backbone purposes, we
> have
> pointopoint-Links with a more narrow netmask here in berlin (that is
> x.0.0.0/8 for ad-hoc and x.0.0.0/30 for pointopoint). If you plan to link
> two meshes, it's a good idea to use different IPs in each. Then you can
> announce one mesh with HNA in the other (and vice versa) on the gateway.




More information about the Olsr-users mailing list