[OLSR-users] Willingness not taken into account in route table

[Frédéric DELAUNAY]

here's a picture to see topology
Fred

Frédéric DELAUNAY a écrit :

> Hi,
>
> Here's my topologie using ethernet.
>                              10.0.3
>                            .1       .2
>                            /           \
>                          /               \
> 10.0.1.2--- HUB               HUB ---- 10.0.4.1
>                           \              /
>                             \          /
>                              .1      .2
>                              10.0.2
>
> So two nodes with two interfaces. By default 10.0.4.1 and 10.0.1.2 
> choose 10.0.3.x node as MPR. I set Willingness at 7 (ALWAYS) on node 
> 10.0.2.x. 10.0.3.x Willingness is 3. For information I can see that 
> information on all nodes.
>
> on node 10.0.4.1, olsrd-gui in MAIN display 10.0.2.2 as MPR. But there 
> are no change in my route table. And effectively all trafic goes 
> through 10.0.3.x. When I disconnect 10.0.3.x node, trafic goes though 
> 10.0.2.x, but as soon as I replug 10.0.3. trafic goes back to that node.
>
> is that a bug ?
>
> thanks,
> _______________________________________________
> olsr-users mailing list
> (spam-protected)
> https://www.olsr.org/mailman/listinfo/olsr-users
>

-------------- next part --------------
A non-text attachment was scrubbed...
Name: olsrd_topo_carre.gif
Type: image/gif
Size: 14180 bytes
Desc: not available
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20050408/5c9b58d1/attachment.gif>