[OLSR-users] Re: OLSRD

[Andreas Tønnesen]

Hmmm... looks stragne. Try disabling hysteresis.

set:
USE_HYSTERESIS no

in the configfile.

  - andreas



Sergey V Mayzus wrote:
> yes, it happens again and again in the interval between "Deleting route" ..
> "Adding route".
> in the conf file of one side there is the following lines:
> 
> HNA4 10.0.0.0 255.0.0.0
> HNA4 39.0.0.1 255.255.255.0
> 
> on other side
> HAN4 10.0.0.0 255.0.0.0
> 
> So, the WRT broadcasts via HNA that network 39.0.0.1 is connected to it.
> 
> Sergey
> 
> 
> ----- Original Message -----
> From: "Andreas Tønnesen" <(spam-protected)>
> To: "Sergey V Mayzus" <(spam-protected)>
> Sent: Friday, October 08, 2004 5:25 PM
> Subject: Re: OLSRD
> 
> 
> 
> How does it update? Does this happen more than once after startup?
> In a setup like yours, all routes should be stable(static) after the
> first route calculations are done.
> 
> - Andreas
> 
> On Fri, 08 Oct 2004, Sergey V Mayzus wrote:
> 
> 
>>It updates route from 10.0.0.2 to 39.0.0.1/2 through 10.0.0.1
>>
>>Sergey
>>
>>
>>----- Original Message -----
>>From: "Andreas Tønnesen" <(spam-protected)>
>>To: <(spam-protected)>
>>Cc: "Sergey V Mayzus" <(spam-protected)>
>>Sent: Friday, October 08, 2004 5:11 PM
>>Subject: Re: OLSRD
>>
>>
>>
>>I'm sending this to the mailinglist.
>>
>>Why is there a update in routes? It seems like a static setup to me.
>>
>>- Andreas
>>
>>
>>>Hello Andreas,
>>>
>>>I'm using OLSRD 0.4.7 and have the problem with lost of connection when
>>>routes are updated (in the period when routes deleted until routes
> 
> added).
> 
>>>I'm using the following architecture:
>>>
>>>1. WRT54G with IP address of wireless interface: 10.0.0.1, IP Address of
>>>ethernet interface 39.0.0.1. There is computer connected to this WRT
> 
> with
> 
>>>ip address 39.0.0.2
>>>2. PC with Wi-Fi card with IP Address 10.0.0.2
>>>
>>>when OLSRD running on both sides, I can ping IP Address 39.0.0.2 (or
>>>39.0.0.1) from PC with IP Address 10.0.0.2, but it continues until
>>>"Deleting Route" messages come. Then in about 0.5 -1.0 sec ping may pass
>>>again. This is a big problem on large file transmissions from 39.0.0.2
> 
> to
> 
>>>10.0.0.2 - the transmission terminates when routes deleted and should be
>>>restarted again and again.
>>>
>>>Is any solution to resolve this problem?
>>>
>>>Sergey
>>>
>>
>>
>>---------
>>Andreas Tønnesen
>>http://www.olsr.org
>>
> 
> 
> --
> Andreas Tønnesen((spam-protected))
> http://www.olsr.org
> 
> _______________________________________________
> olsr-users mailing list
> (spam-protected)
> https://www.olsr.org/mailman/listinfo/olsr-users

-- 
Andreas Tønnesen
http://www.olsr.org