[OLSR-users] Re: OLSRD
Sergey V Mayzus
(spam-protected)
Fri Oct 8 17:01:35 CEST 2004
The following is debug output (I used 10.0.0.1 and 10.0.0.2 instead of real
addresses for better understanding)
*** olsr.org - 0.4.7 ***
Build date: Sep 24 2004
http://www.olsr.org
hello interval = 2.00 hello int nonwireless = 2.00
tc interval = 5.00 polling interval = 0.10
neighbor_hold_time = 6.00 neighbor_hold_time_nw = 6.00
topology_hold_time = 15.00 tos setting = 16
hna_interval = 10.00 mid_interval = 5.00
tc_redunadancy = 0 mpr coverage = 1
hysteresis scaling factor = 0.50
hysteresis threshold high = 0.80
hysteresis threshold low = 0.30
Using IP version 4
---- Interface configuration ----
Checking eth2:
Wireless interface detected
Interface eth2 set up for use with index 0
Address:10.217.96.104
Netmask:255.0.0.0
Broadcast address:10.255.255.255
Adding OLSR socket entry 5
New main address: 10.217.96.104
Loading plugins...
---------- Plugin loader ----------
Library: olsrd_dyn_gw.so.0.1
OLSRD dynamic gateway plugin 0.1 by Andreas T?nnesen
Checking plugin interface version.... 1 - OK
Trying to fetch plugin IO function....OK
Trying to fetch register function....OK
Running registration function...
Adding OLSR socket entry 9
---------- LIBRARY LOADED ----------
Main address: 10.217.96.104
NEIGHBORS: l=linkstate, m=MPR, w=willingness
Scheduler started - polling every 0.10 seconds
Neighbor list(01:05:49.892718):
MPRS: adding 10.59.215.247
Willingness for 10.59.215.247 changed from 0 to 7 - UPDATING
Neighbor list(01:05:51.870075):
10.59.215.247:l=0:m=0:w=7[2hlist:]
Neighbor list(01:05:53.740086):
10.59.215.247:l=0:m=0:w=7[2hlist:]
HYST[10.59.215.247] link set to NOT pending!
Setting 10.59.215.247 as MPR
(ioctl)Adding route: 10.59.215.247 gw 10.59.215.247 (hopc 1)
TC: adding entry 10.59.215.247
Neighbor list(01:05:55.610099):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:05:57.700092):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:05:59.460072):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:06:01.220266):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:06:03.200122):
10.59.215.247:l=1:m=1:w=7[2hlist:]
(ioctl)Adding route: 0.0.0.0 gw 10.59.215.247 (hopc 1)
(ioctl)Adding route: 39.0.0.0 gw 10.59.215.247 (hopc 1)
(ioctl)Adding route: 7.0.0.0 gw 10.59.215.247 (hopc 1)
(ioctl)Adding route: 10.0.0.0 gw 10.59.215.247 (hopc 1)
Neighbor list(01:06:05.070103):
10.59.215.247:l=1:m=1:w=7[2hlist:]
HYST[10.59.215.247] HELLO timeout 0.187
HYST[10.59.215.247] link set to pending!
(ioctl)Deleting route: 10.59.215.247(hopc 2)
(ioctl)Deleting route: 0.0.0.0(hopc 2)
(ioctl)Deleting route: 39.0.0.0(hopc 2)
(ioctl)Deleting route: 7.0.0.0(hopc 2)
(ioctl)Deleting route: 10.0.0.0(hopc 2)
Neighbor list(01:06:07.050119):
10.59.215.247:l=0:m=0:w=7[2hlist:]
Neighbor list(01:06:08.810083):
10.59.215.247:l=0:m=0:w=7[2hlist:]
HYST[10.59.215.247] HELLO timeout 0.094
MPRS: Timing out 10.59.215.247
TC: Sending empty package
TC-SET: Deleting empty entry 10.59.215.247 ->
Neighbor list(01:06:10.900080):
10.59.215.247:l=0:m=0:w=7[2hlist:]
HYST[10.59.215.247] link set to NOT pending!
Setting 10.59.215.247 as MPR
(ioctl)Adding route: 10.59.215.247 gw 10.59.215.247 (hopc 1)
(ioctl)Adding route: 0.0.0.0 gw 10.59.215.247 (hopc 1)
(ioctl)Adding route: 39.0.0.0 gw 10.59.215.247 (hopc 1)
(ioctl)Adding route: 7.0.0.0 gw 10.59.215.247 (hopc 1)
(ioctl)Adding route: 10.0.0.0 gw 10.59.215.247 (hopc 1)
Neighbor list(01:06:12.990104):
10.59.215.247:l=1:m=1:w=7[2hlist:]
TC: adding entry 10.59.215.247
MPRS: adding 10.59.215.247
Neighbor list(01:06:14.860077):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:06:16.950108):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:06:19.150118):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:06:21.350219):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:06:23.110073):
10.59.215.247:l=1:m=1:w=7[2hlist:]
HYST[10.59.215.247] HELLO timeout 0.500
Neighbor list(01:06:25.310115):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:06:27.180072):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:06:29.050129):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:06:31.140125):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:06:33.120091):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:06:34.880098):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:06:36.970100):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:06:39.170078):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:06:41.260079):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:06:43.240077):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:06:45.220096):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:06:47.420080):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:06:49.290077):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:06:51.270078):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:06:53.250084):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:06:55.120090):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:06:56.990103):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:06:59.080100):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:07:00.840147):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:07:03.040082):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:07:04.910192):
10.59.215.247:l=1:m=1:w=7[2hlist:]
HYST[10.59.215.247] HELLO timeout 0.375
Neighbor list(01:07:06.783546):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:07:08.760099):
10.59.215.247:l=1:m=1:w=7[2hlist:]
HYST[10.59.215.247] HELLO timeout 0.240
HYST[10.59.215.247] link set to pending!
(ioctl)Deleting route: 10.59.215.247(hopc 2)
(ioctl)Deleting route: 0.0.0.0(hopc 2)
(ioctl)Deleting route: 39.0.0.0(hopc 2)
(ioctl)Deleting route: 7.0.0.0(hopc 2)
(ioctl)Deleting route: 10.0.0.0(hopc 2)
Neighbor list(01:07:10.960291):
10.59.215.247:l=0:m=0:w=7[2hlist:]
HYST[10.59.215.247] link set to NOT pending!
Setting 10.59.215.247 as MPR
(ioctl)Adding route: 10.59.215.247 gw 10.59.215.247 (hopc 1)
(ioctl)Adding route: 0.0.0.0 gw 10.59.215.247 (hopc 1)
(ioctl)Adding route: 39.0.0.0 gw 10.59.215.247 (hopc 1)
(ioctl)Adding route: 7.0.0.0 gw 10.59.215.247 (hopc 1)
(ioctl)Adding route: 10.0.0.0 gw 10.59.215.247 (hopc 1)
Neighbor list(01:07:13.050138):
10.59.215.247:l=1:m=1:w=7[2hlist:]
MPRS: Timing out 10.59.215.247
TC: Sending empty package
MPRS: adding 10.59.215.247
Neighbor list(01:07:14.810076):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:07:16.680093):
10.59.215.247:l=1:m=1:w=7[2hlist:]
Neighbor list(01:07:18.770076):
10.59.215.247:l=1:m=1:w=7[2hlist:]
----- Original Message -----
From: "Andreas Tønnesen" <(spam-protected)>
To: "Sergey V Mayzus" <(spam-protected)>
Sent: Friday, October 08, 2004 5:25 PM
Subject: Re: OLSRD
How does it update? Does this happen more than once after startup?
In a setup like yours, all routes should be stable(static) after the
first route calculations are done.
- Andreas
On Fri, 08 Oct 2004, Sergey V Mayzus wrote:
> It updates route from 10.0.0.2 to 39.0.0.1/2 through 10.0.0.1
>
> Sergey
>
>
> ----- Original Message -----
> From: "Andreas Tønnesen" <(spam-protected)>
> To: <(spam-protected)>
> Cc: "Sergey V Mayzus" <(spam-protected)>
> Sent: Friday, October 08, 2004 5:11 PM
> Subject: Re: OLSRD
>
>
>
> I'm sending this to the mailinglist.
>
> Why is there a update in routes? It seems like a static setup to me.
>
> - Andreas
>
> > Hello Andreas,
> >
> > I'm using OLSRD 0.4.7 and have the problem with lost of connection when
> > routes are updated (in the period when routes deleted until routes
added).
> >
> > I'm using the following architecture:
> >
> > 1. WRT54G with IP address of wireless interface: 10.0.0.1, IP Address of
> > ethernet interface 39.0.0.1. There is computer connected to this WRT
with
> > ip address 39.0.0.2
> > 2. PC with Wi-Fi card with IP Address 10.0.0.2
> >
> > when OLSRD running on both sides, I can ping IP Address 39.0.0.2 (or
> > 39.0.0.1) from PC with IP Address 10.0.0.2, but it continues until
> > "Deleting Route" messages come. Then in about 0.5 -1.0 sec ping may pass
> > again. This is a big problem on large file transmissions from 39.0.0.2
to
> > 10.0.0.2 - the transmission terminates when routes deleted and should be
> > restarted again and again.
> >
> > Is any solution to resolve this problem?
> >
> > Sergey
> >
>
>
> ---------
> Andreas Tønnesen
> http://www.olsr.org
>
--
Andreas Tønnesen((spam-protected))
http://www.olsr.org
More information about the Olsr-users
mailing list