[OLSR-users] Re: OLSRD

[Sergey V Mayzus]

yes, it happens again and again in the interval between "Deleting route" ..
"Adding route".
in the conf file of one side there is the following lines:

HNA4 10.0.0.0 255.0.0.0
HNA4 39.0.0.1 255.255.255.0

on other side
HAN4 10.0.0.0 255.0.0.0

So, the WRT broadcasts via HNA that network 39.0.0.1 is connected to it.

Sergey


----- Original Message -----
From: "Andreas Tønnesen" <(spam-protected)>
To: "Sergey V Mayzus" <(spam-protected)>
Sent: Friday, October 08, 2004 5:25 PM
Subject: Re: OLSRD



How does it update? Does this happen more than once after startup?
In a setup like yours, all routes should be stable(static) after the
first route calculations are done.

- Andreas

On Fri, 08 Oct 2004, Sergey V Mayzus wrote:

> It updates route from 10.0.0.2 to 39.0.0.1/2 through 10.0.0.1
>
> Sergey
>
>
> ----- Original Message -----
> From: "Andreas Tønnesen" <(spam-protected)>
> To: <(spam-protected)>
> Cc: "Sergey V Mayzus" <(spam-protected)>
> Sent: Friday, October 08, 2004 5:11 PM
> Subject: Re: OLSRD
>
>
>
> I'm sending this to the mailinglist.
>
> Why is there a update in routes? It seems like a static setup to me.
>
> - Andreas
>
> > Hello Andreas,
> >
> > I'm using OLSRD 0.4.7 and have the problem with lost of connection when
> > routes are updated (in the period when routes deleted until routes
added).
> >
> > I'm using the following architecture:
> >
> > 1. WRT54G with IP address of wireless interface: 10.0.0.1, IP Address of
> > ethernet interface 39.0.0.1. There is computer connected to this WRT
with
> > ip address 39.0.0.2
> > 2. PC with Wi-Fi card with IP Address 10.0.0.2
> >
> > when OLSRD running on both sides, I can ping IP Address 39.0.0.2 (or
> > 39.0.0.1) from PC with IP Address 10.0.0.2, but it continues until
> > "Deleting Route" messages come. Then in about 0.5 -1.0 sec ping may pass
> > again. This is a big problem on large file transmissions from 39.0.0.2
to
> > 10.0.0.2 - the transmission terminates when routes deleted and should be
> > restarted again and again.
> >
> > Is any solution to resolve this problem?
> >
> > Sergey
> >
>
>
> ---------
> Andreas Tønnesen
> http://www.olsr.org
>

--
Andreas Tønnesen((spam-protected))
http://www.olsr.org