[OLSR-users] Problem on subnet routing

[Bjoern Riemer]

hi
node B and node C sould announce a HNA record.
you must write it to the config file under the HNA6 section for ipv6 or hna4 section for ipv4
or you could enable NAT on node B and C ..

- björn

(spam-protected) wrote:
> Hi all,
> 
> I have a small manet which includes 3 laptops. laptop
> A is the gateway to Internet, B and C is the mobile
> router. A, B and C are running OLSR. For both B and C,
> each of them is the gateway of another small lan which
> only have one laptop connected, let them be Client pc
> D and E which are not running OLSR.
> 
> My problem is D and E are unable to ping6 to A which
> is the gateway to Internet. After I monitor the
> traffic, I found that it is because A don't have the
> route to D and E which are not running OLSR. 
> 
> I doubt if OLSR only setup routes for nodes that
> running OLSR and don't setup the route to the
> sub-networks connected to one of the Mobile node. If
> in that case, I have to manually setup the route to
> each subnet which is undesirable.  I am wondering if
> there is a way to solve it.
> 
> Any idea? Any help is appreciated. Thanks in advance!
> 
> Regards,
> 
> Xia Yang
> 
> _______________________________________________
> olsr-users mailing list
> (spam-protected)
> https://www.olsr.org/mailman/listinfo/olsr-users