[Olsr-dev] Migration from olsrd v1 to v2
Fri Jul 10 17:06:41 CEST 2015
On Fri, Jul 10, 2015 at 4:57 PM, Conrad Lara <(spam-protected)> wrote:
> I won't classify the networks I work with as dense, we use it extensively on every device.
With "dense deployment" (of the nameservice plugin) I mean that you
have it deployed on every node or at least a continuous subset of
Instead of "just a couple of mesh nodes which are not directly in
contact with each other".
> Emergency Communications full redundancy and no centralized point of failure is a mandatory system spec for the project I work with where devices will come and go and there is no guarantee of a set command structure and a split must be presumed to happen at any moment.
> I do agree with the concern on flooding data it's a tough subject. I know that's been tried to be lessened in the past on some parts by doing tried floods (1 hop, 3hop IIRC, 255 hop) reduce flooding but increase convergence time.
Yes. I will see what I can do, but it might take few weeks to get a
prototype done. I will be looking for volunteers/guinea... ehh...
someone to test it. ;)
More information about the Olsr-dev