[Olsr-dev] olsrv2 routes with same source IP regardless of outgoing interface

[Henning Rogge]

Hi,

could you test if the attached patch resolves the problem on "ipv4
only" interfaces?

Henning

On Tue, Jul 8, 2014 at 6:32 AM, Vigneswaran R <(spam-protected)> wrote:
> On 07/07/2014 05:19 PM, Vigneswaran R wrote:
>>
>> On 07/07/2014 04:26 PM, Henning Rogge wrote:
>>>>>
>>>>> That will be the reason, the plugin doesn't work without IPv6... and
>>>>> it doesn't recognize this situation correctly.
>>>>
>>>> Oh, ok. Is there any way to assign link local IPv6 addresses
>>>> automatically?
>>>
>>> It should happen if your kernel supports IPv6...
>>>
>>> the plugin uses the NHDP (Hello) communication over both IPv4 and IPv6
>>> to handle the linklocal IPv4 assignment.
>>>
>>> Thank you for testing the plugin.
>>
>>
>> I will read about enabling/using IPv6. Thanks.
>
>
> Successfully tested OLSRv2 with the following configuration,
>
> * main IP assigned to 'lo' interface
> * left the remaining interfaces without assigning any IPv4 address
>   -- they are just UP with LL IPv6 addresses assigned by the kernel
>
> OLSRv2 automatically assigned IPv4 addresses to the interfaces and created
> the routes. Thanks for your guidance.
>
>
> Regards,
> Vignesh
-------------- next part --------------
A non-text attachment was scrubbed...
Name: autoll4.patch
Type: text/x-patch
Size: 720 bytes
Desc: not available
URL: <http://lists.olsr.org/pipermail/olsr-dev/attachments/20140708/dc6362f1/attachment.bin>