[Olsr-dev] OLSRv2 release version 0.3.0

[Syed Salman Haider Rizvi]

Actually i m creating a test bed for almost 8 routers running with openwrt and the routers at the source and destination are communicating with my laptop/pc (lan4) interface . Please let me know how i will be able to use both wlan0 and lan4 for my olsrd communication . Also let me know the process so when my router will start it will be run automatically in the daemon mode (/etc/init.d/olsrd2 start) ?
Thanks

> Date: Thu, 19 Sep 2013 14:44:24 +0200
> From: (spam-protected)
> To: (spam-protected)
> CC: (spam-protected)
> Subject: Re: [Olsr-dev] OLSRv2 release version 0.3.0
> 
> On 09/19/2013 02:37 PM, Syed Salman Haider Rizvi wrote:
> > (spam-protected):/tmp# olsrd2 wlan0 lan4 lo
> > 
> > 00:15:42.967 WARN(os_net)
> > /root/openwrt/attitude_adjustment/package/oonfapi/src-api/subsystems/os_linux/os_net_linux.c
> > 111: Cannot open ipv6 ioctl socket: Address family not supported by
> > protocol (124)
> > 00:15:42.975 WARN(os_net)
> > /root/openwrt/attitude_adjustment/package/oonfapi/src-api/subsystems/os_linux/os_net_linux.c
> > 400: Error, cannot open proc entry
> > /proc/sys/net/ipv6/conf/all/forwarding: No such file or directory (2)
> > 00:15:42.975 WARN(os_net)
> > /root/openwrt/attitude_adjustment/package/oonfapi/src-api/subsystems/os_linux/os_net_linux.c
> > 336: WARNING! Could not activate ip_forward for ipv6! You should
> > manually ensure that ip_forward for ipv6 is activated!
> > 00:15:42.976 WARN(packet)
> > 00:15:42.978 WARN(stream)
> > /root/openwrt/attitude_adjustment/package/oonfapi/src-api/subsystems/os_generic/os_net_generic_getsocket.c
> > 70: Cannot open socket: Address family not supported by protocol (124)
> 
> Okay, this ones are most likely warnings that your kernel doesn't
> support IPv6... I must admit I don't know if I tested this, even our
> local OpenWRT installations are all IPv6 capable.
> 
> I have to setup a test environment for this tomorrow, so I can clean
> this up.
> 
> > /root/openwrt/attitude_adjustment/package/oonfapi/src-api/subsystems
> > /os_generic/os_net_generic_join_mcast.c
> > 148: Cannot set multicast wlan0 (src 224.0.0.109) on interface
> > 10.0.1.9:
> > Invalid argument (22)
> 
> This one is a little bit more strange, can you post your network
> configuration? Interfaces, bridges, IP addresses on interfaces?
> 
> Henning Rogge
> 
> -- 
> Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
> Kommunikation, Informationsverarbeitung und Ergonomie FKIE
> Kommunikationssysteme (KOM)
> Fraunhofer Straße 20, 53343 Wachtberg, Germany
> Telefon +49 228 9435-961,   Fax +49 228 9435 685
> mailto:(spam-protected) http://www.fkie.fraunhofer.de
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-dev/attachments/20130919/883759c3/attachment.html>