<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>Actually i m creating a test bed for almost 8 routers running with openwrt and the routers at the source and destination are communicating with my laptop/pc (lan4) interface . Please let me know how i will be able to use both wlan0 and lan4 for my olsrd communication . Also let me know the process so when my router will start it will be run automatically in the daemon mode (/etc/init.d/olsrd2 start) ?<div><br></div><div>Thanks</div><div><br><br><div>> Date: Thu, 19 Sep 2013 14:44:24 +0200<br>> From: henning.rogge@fkie.fraunhofer.de<br>> To: salmanhaider5@hotmail.com<br>> CC: olsr-dev@lists.olsr.org<br>> Subject: Re: [Olsr-dev] OLSRv2 release version 0.3.0<br>> <br>> On 09/19/2013 02:37 PM, Syed Salman Haider Rizvi wrote:<br>> > root@OpenWrt:/tmp# olsrd2 wlan0 lan4 lo<br>> > <br>> > 00:15:42.967 WARN(os_net)<br>> > /root/openwrt/attitude_adjustment/package/oonfapi/src-api/subsystems/os_linux/os_net_linux.c<br>> > 111: Cannot open ipv6 ioctl socket: Address family not supported by<br>> > protocol (124)<br>> > 00:15:42.975 WARN(os_net)<br>> > /root/openwrt/attitude_adjustment/package/oonfapi/src-api/subsystems/os_linux/os_net_linux.c<br>> > 400: Error, cannot open proc entry<br>> > /proc/sys/net/ipv6/conf/all/forwarding: No such file or directory (2)<br>> > 00:15:42.975 WARN(os_net)<br>> > /root/openwrt/attitude_adjustment/package/oonfapi/src-api/subsystems/os_linux/os_net_linux.c<br>> > 336: WARNING! Could not activate ip_forward for ipv6! You should<br>> > manually ensure that ip_forward for ipv6 is activated!<br>> > 00:15:42.976 WARN(packet)<br>> > 00:15:42.978 WARN(stream)<br>> > /root/openwrt/attitude_adjustment/package/oonfapi/src-api/subsystems/os_generic/os_net_generic_getsocket.c<br>> > 70: Cannot open socket: Address family not supported by protocol (124)<br>> <br>> Okay, this ones are most likely warnings that your kernel doesn't<br>> support IPv6... I must admit I don't know if I tested this, even our<br>> local OpenWRT installations are all IPv6 capable.<br>> <br>> I have to setup a test environment for this tomorrow, so I can clean<br>> this up.<br>> <br>> > /root/openwrt/attitude_adjustment/package/oonfapi/src-api/subsystems<br>> > /os_generic/os_net_generic_join_mcast.c<br>> > 148: Cannot set multicast wlan0 (src 224.0.0.109) on interface<br>> > 10.0.1.9:<br>> > Invalid argument (22)<br>> <br>> This one is a little bit more strange, can you post your network<br>> configuration? Interfaces, bridges, IP addresses on interfaces?<br>> <br>> Henning Rogge<br>> <br>> -- <br>> Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für<br>> Kommunikation, Informationsverarbeitung und Ergonomie FKIE<br>> Kommunikationssysteme (KOM)<br>> Fraunhofer Straße 20, 53343 Wachtberg, Germany<br>> Telefon +49 228 9435-961, Fax +49 228 9435 685<br>> mailto:henning.rogge@fkie.fraunhofer.de http://www.fkie.fraunhofer.de<br>> <br></div></div> </div></body>
</html>