[Olsr-dev] does the current Debian olsrd.conf work with a mesh?

[Henning Rogge]

On 06/28/2012 07:48 AM, Teco Boot wrote:
>> Just put in the necessary values... interface names and the
>> plugins. That should be enough for 99% of the mesh networks out
>> there and should work well for stationary city meshs. If you want
>> to be sure that you don't get in trouble with subnetworks, add the
>> "IPv4Broadcast 255.255.255.255" to the interface section too.
>>
> How can an installer know which interface is used for OLSR? Adding
> all is a bit to much, I think.
>
> For starters, a config script would be nice. Not all can handle vi.

Maybe the script could give the user a list of the existing interfaces 
and the user has to select the Mesh interfaces and (optionally) the 
uplink interface.

Henning Rogge

-- 
Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
Kommunikation, Informationsverarbeitung und Ergonomie FKIE
Kommunikationssysteme (KOM)
Neuenahrer Straße 20, 53343 Wachtberg, Germany
Telefon +49 228 9435-961,   Fax +49 228 9435 685
mailto:(spam-protected) http://www.fkie.fraunhofer.de
GPG: E1C6 0914 490B 3909 D944 F80D 4487 C67C 55EC CFE0



-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 6169 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.olsr.org/pipermail/olsr-dev/attachments/20120628/9741622f/attachment.bin>