[Olsr-dev] mac80211 / link-bandwith from userland forcostcalculation / plugin

[Henning Rogge]

On Mon September 13 2010 22:34:39 Teco Boot wrote:
First, we must get metric exchange right
> (OLSRv2, following RFC's). Then, we should use L2 metrics, if available
> (data rate, RSSI), and use OLSR packet loss (ETX) as fall-back. Within
> grey zone boundary, data rate / RSSI are important. Then, at lower rates,
> OLSR packet loss is becoming more important. Data rate measurement is
> dependent on unicast trafic (user traffic?), which may be problematic. In
> all cases, dampening / hysteresis is crucial.
> And we have to think about triggered TC updates.
> (sound like goodies under Christmas tree...)
I totally agree to this... 

sorry that the OLSRv2 stuff is moving forward that slowly.

Henning Rogge
-- 
Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
Kommunikation, Informationsverarbeitung und Ergonomie FKIE
Kommunikationssysteme (KOM)
Neuenahrer Straße 20, 53343 Wachtberg, Germany
Telefon +49 228 9435-961,   Fax +49 228 9435 685
mailto:(spam-protected) http://www.fkie.fraunhofer.de
GPG: E1C6 0914 490B 3909 D944 F80D 4487 C67C 55EC CFE0
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.olsr.org/pipermail/olsr-dev/attachments/20100914/0cb0f79b/attachment.sig>