[Olsr-users] DLEP Plugin use with OLSR

[Teco Boot]

> Op 20 okt. 2016, om 10:31 heeft Dhruva Shrivastava <(spam-protected)> het volgende geschreven:
> 
> Hi All,
> 
> I am able to run the OLSR using two linux laptop as mesh nodes. Now I have to setup my whole scenario which also consist the LTE modem as radio node.
> 
> Do you guys suggest how I can use the DLEP plugins with the OLSR? 

What is the peer link of the LTE modem? Does it run OLSR?


> 
> There is not enough information in wiki :(

You are encouraged to propose additions :-))


> 
> If you guys have some more information please share. I have to interface the LTE modem as radio node which can use DLEP with the OLSR router.

I guess your use case is very similar to what I brought in in the DLEP design team: some way 3GPP standards and IETF standards are lined up. The outcome is that there is a protocol converter needed, having access to the 3GPP radio (e.g. TS 27.007), converts the information to DLEP and provide it to OLSR. Conversion is not  that easy, as information elements differ a lot.
See: https://www.ietf.org/mail-archive/web/manet-dlep-rg/current/msg00002.html


For OLSR(v1), there is a SmartGateway interface, reading from info file. See README-Olsr-Extensions for details.


What is your plan?

Teco



> 
> Thanks!!
> 
> Best Regards,
> Dhruva
> 
> On Wed, Oct 19, 2016 at 12:00 PM, <(spam-protected)> wrote:
> Send Olsr-users mailing list submissions to
>         (spam-protected)
> 
> To subscribe or unsubscribe via the World Wide Web, visit
>         https://lists.olsr.org/mailman/listinfo/olsr-users
> or, via email, send a message with subject or body 'help' to
>         (spam-protected)
> 
> You can reach the person managing the list at
>         (spam-protected)
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Olsr-users digest..."
> 
> 
> Today's Topics:
> 
>    1. OLSRd2 Issue (Dhruva Shrivastava)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Tue, 18 Oct 2016 12:04:43 +0200
> From: Dhruva Shrivastava <(spam-protected)>
> To: (spam-protected)
> Subject: [Olsr-users] OLSRd2 Issue
> Message-ID:
>         <(spam-protected)>
> Content-Type: text/plain; charset="utf-8"
> 
> Dear All,
> 
> I am new to OLSR and developing a network using it. At present in my
> network configuration I have two laptops running Linux Mint 18.
> 
> I have installed the olsrd2 as mentioned in the wiki. And I am also able to
> run the olsr but issue is with the routing table and when I see the IP
> Address of thee wifi of both system. They have same IP address.
> 
> My configuration is mentioned below:
> 
> I have configured IP Address on loopback Interface on both system 10.0.1.0
> /24 network and assigned the IPV6 link local address to WiFi interface
> (FE80::/64).
> 
> I can ping both the system using the loopback interface ip address but I
> can't see those routes if I run the "ip route" command.
> 
> Can you please suggest what I am doing wrong. Thanks
> 
> Best Regards,
> Dhruva
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20161018/5ec5eed9/attachment-0001.html>
> 
> ------------------------------
> 
> Subject: Digest Footer
> 
> --
> Olsr-users mailing list
> (spam-protected)
> https://lists.olsr.org/mailman/listinfo/olsr-users
> 
> ------------------------------
> 
> End of Olsr-users Digest, Vol 112, Issue 3
> ******************************************
> 
> -- 
> Olsr-users mailing list
> (spam-protected)
> https://lists.olsr.org/mailman/listinfo/olsr-users