[Olsr-users] hybrid olsr

[Henning Rogge]

Both...

you might also find the "Troubleshooting" entry in the olsr.org wiki useful:
http://www.olsr.org/mediawiki/index.php/Troubleshooting

Henning

On Mon, Aug 29, 2016 at 3:15 PM, Janu Adwiyanto <(spam-protected)>
wrote:

> thank you for responses. which olsrd.conf on the router or pc or both?
>
> 2016-08-28 19:26 GMT+08:00 Henning Rogge <(spam-protected)>:
>
>> Could you (as a first step) please remove all the settings from the olsrd
>> config that you don't need or don't know what they are doing?
>>
>> Run it with an "as default as possible" configuration before trying
>> something fancy.
>>
>> 2nd comment: I think the olsrd.conf is broken, some part at the end is
>> there twice... copypasta error while writing this mail?
>>
>> Henning
>>
>> On Wed, Aug 17, 2016 at 5:05 PM, Janu Adwiyanto <(spam-protected)>
>> wrote:
>>
>>> good day
>>> my name is janu
>>>
>>> I already install olsr in router tp-link tl-mr3420 and laptop in router
>>> i use openwrt-ar71xx-generic-tl-mr3420-v2-squashfs-factory-Barrier
>>> Breaker berlin-77. and package is luci-app-olsr-viz, olsrd-mod-dyn-gw,
>>> olsrd-mod-httpinfo, olsrd-mod-txtinfo,
>>> olsrd-mod-dot-draw  olsrd-mod-mdns  olsrd-mod-p2pd  olsrd-mod-secure.
>>> In laptop i use ubuntu 12.0 and linux mint 18. i have already connect
>>> between laptop to laptop & router to router,
>>>
>>> laptop to laptop & router to router is already connect but i have
>>> problem to connect laptop to router does anyone have a solution about it?
>>>
>>> on the router:
>>> */etc/config/wireless*
>>> config wifi-device 'radio'
>>> option type 'mac80211'
>>> option hwmode '11ng'
>>> option path 'platform/ar934x_wmac'
>>> list ht_capab 'LDPC'
>>> list ht_capab 'SHORT-GI-20'
>>> list ht_capab 'SHORT-GI-40'
>>> list ht_capab 'TX-STBC'
>>> list ht_capab 'RX-STBC1'
>>> list ht_capab 'DSSS_CCK-40'
>>> option country 'DE'
>>> option channel '1'
>>> option noscan '1'
>>> option distance '1000'
>>> option htmode 'HT40+'
>>> option txpower '18'
>>> option chanbw '20'
>>> option txantenna 'all'
>>> option rxantenna 'all'
>>>
>>> config wifi-iface
>>> option device 'radio0'
>>> option encryption 'none'
>>> option bssid '7A:B0:60:FD:30:0E'
>>> option mode 'adhoc'
>>> option network 'wireless0'
>>> option ssid 'MESH'
>>>
>>> config wifi-iface
>>> option network 'wireless0dhcp'
>>> option encryption 'none'
>>> option device 'radio0'
>>> option mode 'ap'
>>> option ssid 'AP-94d6-2.mesh'
>>>
>>> /etc/config/network
>>> config interface 'loopback'
>>> option ifname 'lo'
>>> option proto 'static'
>>> option ipaddr '127.0.0.1'
>>> option netmask '255.0.0.0'
>>>
>>> config globals 'globals'
>>> option ula_prefix 'fdda:b490:46ce::/48'
>>>
>>> config interface 'lan'
>>> option ifname 'eth1'
>>> option type 'bridge'
>>> option proto 'static'
>>> option netmask '255.255.255.0'
>>> option ipassign '64'
>>> option apaddr '192.168.1.10'
>>>
>>> config interface 'wan'
>>> option ifname 'eth0'
>>> option proto 'dhcp'
>>>
>>> config interface 'wan6'
>>> option ifname '@wan'
>>> option proto 'dhcp6'
>>>
>>> config switch
>>> option name 'switch0'
>>> option reset '1'
>>> option enable_vlan '1'
>>>
>>> config switch_vlan
>>> option device 'switch0'
>>> option vlan '1'
>>> option ports '0 1 2 3 4'
>>>
>>> config interface 'wireless0'
>>> option ip6assign '64'
>>> option proto 'static'
>>> list dns '2002:d596:2a92:1:71:53::'
>>> list dns '2002:5968:c28e::53'
>>> option netmask '255.255.255.0'
>>> option ipaddr '192.168.1.20'
>>> option _orig_ifname 'wlan0'
>>> option _orig_bridge 'false'
>>>
>>> config interface 'wireless0dhcp'
>>> option ip6assign '64'
>>> option proto 'static'
>>>
>>> /etc/olsrd.conf
>>> Hna4
>>> {
>>> }
>>> Hna6
>>> {
>>> }
>>> LoadPlugin "olsrd_txtinfo.so.0.1"
>>> {
>>> PlParam "accept" "0.0.0.0"
>>> }
>>> InterfaceDefaults
>>> {
>>> }
>>> Interface "MESH"
>>> {
>>> Mode 'mesh'
>>> }
>>> LoadPlugin "olsrd_httpinfo.so.0."
>>> {
>>> PlParam "port" "1979"
>>> PlParam "Net" "0.0.0.0 0.0.0.0"
>>>
>>>
>>> on pc
>>> /etc/network/interfaces
>>> # interfaces(5) file used by ifup (8) and ifdown(8)
>>> auto lo
>>> ifaee lo inet loopback
>>>
>>> auto wlan0
>>>
>>> allo-hot plug wlan0
>>> iface wlan inet static
>>> address 192.168.1.80
>>> netmask 255.255.255.0
>>> wireless-mode ad-hoc
>>> wireless-channel 1
>>> wireless-essid MESH
>>>
>>> /etc/olsrd/olsrd.conf
>>> DebugLevel 2
>>> Interface "wlan0"
>>> {
>>> HelloInterval 5.0
>>> HelloValidityTime 60.0
>>> TcInterval 2.0
>>> TcValidityTime 90.0
>>> MidInterval 15.0
>>> MidValidityTime 60.0
>>> HnaInterval 15.0
>>> HnaValidityTime 60.0
>>> }
>>> LinkQualityFisheye 1
>>> IpVersion 4
>>> ClearScreen yes
>>> AllowNoInt yes
>>> Willingness 7
>>> LinkQualityLevel 2
>>> Pollrate 0.1
>>> HnaValidityTime 60.0
>>> }
>>> LinkQualityFishEye 1
>>> IpVersion 4
>>> Clearscreen yes
>>> AllowNoInt Yes
>>> Willingness 7
>>> LinkQulityLevel 2
>>> Pollrate 0.1
>>> TcRedundancy 2
>>> MprCoverage 5
>>>
>>> if you know somehting or found any miss on that configuration please let
>>> me know it
>>> thank you
>>>
>>>
>>> --
>>> Olsr-users mailing list
>>> (spam-protected)
>>> https://lists.olsr.org/mailman/listinfo/olsr-users
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20160829/28139847/attachment.html>