[Olsr-users] hybrid olsr

[Henning Rogge]

Could you (as a first step) please remove all the settings from the olsrd
config that you don't need or don't know what they are doing?

Run it with an "as default as possible" configuration before trying
something fancy.

2nd comment: I think the olsrd.conf is broken, some part at the end is
there twice... copypasta error while writing this mail?

Henning

On Wed, Aug 17, 2016 at 5:05 PM, Janu Adwiyanto <(spam-protected)>
wrote:

> good day
> my name is janu
>
> I already install olsr in router tp-link tl-mr3420 and laptop in router i
> use openwrt-ar71xx-generic-tl-mr3420-v2-squashfs-factory-Barrier Breaker
> berlin-77. and package is luci-app-olsr-viz, olsrd-mod-dyn-gw,
> olsrd-mod-httpinfo, olsrd-mod-txtinfo,
> olsrd-mod-dot-draw  olsrd-mod-mdns  olsrd-mod-p2pd  olsrd-mod-secure.
> In laptop i use ubuntu 12.0 and linux mint 18. i have already connect
> between laptop to laptop & router to router,
>
> laptop to laptop & router to router is already connect but i have problem
> to connect laptop to router does anyone have a solution about it?
>
> on the router:
> */etc/config/wireless*
> config wifi-device 'radio'
> option type 'mac80211'
> option hwmode '11ng'
> option path 'platform/ar934x_wmac'
> list ht_capab 'LDPC'
> list ht_capab 'SHORT-GI-20'
> list ht_capab 'SHORT-GI-40'
> list ht_capab 'TX-STBC'
> list ht_capab 'RX-STBC1'
> list ht_capab 'DSSS_CCK-40'
> option country 'DE'
> option channel '1'
> option noscan '1'
> option distance '1000'
> option htmode 'HT40+'
> option txpower '18'
> option chanbw '20'
> option txantenna 'all'
> option rxantenna 'all'
>
> config wifi-iface
> option device 'radio0'
> option encryption 'none'
> option bssid '7A:B0:60:FD:30:0E'
> option mode 'adhoc'
> option network 'wireless0'
> option ssid 'MESH'
>
> config wifi-iface
> option network 'wireless0dhcp'
> option encryption 'none'
> option device 'radio0'
> option mode 'ap'
> option ssid 'AP-94d6-2.mesh'
>
> /etc/config/network
> config interface 'loopback'
> option ifname 'lo'
> option proto 'static'
> option ipaddr '127.0.0.1'
> option netmask '255.0.0.0'
>
> config globals 'globals'
> option ula_prefix 'fdda:b490:46ce::/48'
>
> config interface 'lan'
> option ifname 'eth1'
> option type 'bridge'
> option proto 'static'
> option netmask '255.255.255.0'
> option ipassign '64'
> option apaddr '192.168.1.10'
>
> config interface 'wan'
> option ifname 'eth0'
> option proto 'dhcp'
>
> config interface 'wan6'
> option ifname '@wan'
> option proto 'dhcp6'
>
> config switch
> option name 'switch0'
> option reset '1'
> option enable_vlan '1'
>
> config switch_vlan
> option device 'switch0'
> option vlan '1'
> option ports '0 1 2 3 4'
>
> config interface 'wireless0'
> option ip6assign '64'
> option proto 'static'
> list dns '2002:d596:2a92:1:71:53::'
> list dns '2002:5968:c28e::53'
> option netmask '255.255.255.0'
> option ipaddr '192.168.1.20'
> option _orig_ifname 'wlan0'
> option _orig_bridge 'false'
>
> config interface 'wireless0dhcp'
> option ip6assign '64'
> option proto 'static'
>
> /etc/olsrd.conf
> Hna4
> {
> }
> Hna6
> {
> }
> LoadPlugin "olsrd_txtinfo.so.0.1"
> {
> PlParam "accept" "0.0.0.0"
> }
> InterfaceDefaults
> {
> }
> Interface "MESH"
> {
> Mode 'mesh'
> }
> LoadPlugin "olsrd_httpinfo.so.0."
> {
> PlParam "port" "1979"
> PlParam "Net" "0.0.0.0 0.0.0.0"
>
>
> on pc
> /etc/network/interfaces
> # interfaces(5) file used by ifup (8) and ifdown(8)
> auto lo
> ifaee lo inet loopback
>
> auto wlan0
>
> allo-hot plug wlan0
> iface wlan inet static
> address 192.168.1.80
> netmask 255.255.255.0
> wireless-mode ad-hoc
> wireless-channel 1
> wireless-essid MESH
>
> /etc/olsrd/olsrd.conf
> DebugLevel 2
> Interface "wlan0"
> {
> HelloInterval 5.0
> HelloValidityTime 60.0
> TcInterval 2.0
> TcValidityTime 90.0
> MidInterval 15.0
> MidValidityTime 60.0
> HnaInterval 15.0
> HnaValidityTime 60.0
> }
> LinkQualityFisheye 1
> IpVersion 4
> ClearScreen yes
> AllowNoInt yes
> Willingness 7
> LinkQualityLevel 2
> Pollrate 0.1
> HnaValidityTime 60.0
> }
> LinkQualityFishEye 1
> IpVersion 4
> Clearscreen yes
> AllowNoInt Yes
> Willingness 7
> LinkQulityLevel 2
> Pollrate 0.1
> TcRedundancy 2
> MprCoverage 5
>
> if you know somehting or found any miss on that configuration please let
> me know it
> thank you
>
>
> --
> Olsr-users mailing list
> (spam-protected)
> https://lists.olsr.org/mailman/listinfo/olsr-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20160828/366d766e/attachment.html>