[Olsr-users] olsrd2 with vmware,

[Henning Rogge]

On Tue, Mar 3, 2015 at 8:33 PM, Taner Kurtulus <(spam-protected)> wrote:
> Thanks Henning, for very fast reply.
>
> Now, I am out the office. I could only provide address information. But if
> those are not sufficient, I will send the output of "ip addr" tomorrow.
>
> Here is the address configurations.
> A: 172.1.16.151 <-> B1:172.1.16.162 B2:192.168.1.128 <-> 192.168.1.129
>
> What kind of parameters I should see from the output of ip addr?
>
> By the way, I couldn't find any example configuration file. Is there any?

The default configuration is "no" configuration.

Start with just adding all relevant interfaces to the parameter list.

> olsrd2_static eth1

To make your debugging easier you could just skip the third VM and the
second interface on the second VM. Olsrd2 should still produce an IPv4
routing entry to each one-hop neighbor.

Henning Rogge