[Olsr-users] Olsr_dot_draw plugin runs only once, why ?

[Henning Rogge]

Could you just go into the lib/dotdraw/src/olsrd_dot_draw.c file and
remove the if() block from line 312 to line 319?

This might fix your issue.

Henning

On Tue, Feb 17, 2015 at 3:25 PM, Abubakr Ali <(spam-protected)> wrote:
> Well, I see the following output :
>
> Connected to 10.2.70.108...
> Escape character is ']'.
> disgraph topolopgy
> {
> "10.2.70.108" -> "10.2.70.104"[label="0.000", style=sold];
> "10.2.70.108" [shape=box];
> }
>
> Connection closed by foreign host.
>
> Thant is it !! .. no constant flow of data. Only this data. to see another
> instance of the result, I have to run the command again.
>
> On 16 February 2015 at 07:16, Saverio Proto <(spam-protected)> wrote:
>>
>> if you just do
>>
>> telnet ipaddress 2004
>>
>> do you see a constant flow of data from the dot draw plugin ?
>>
>> Saverio
>>
>> 2015-02-15 15:09 GMT+01:00 Abubakr Ali <(spam-protected)>:
>> > Thank you Saverio for the tip ...
>> >
>> > About the version I'm running OLSRd v:0.6.6.2. The OLSRd itself is
>> > running
>> > fine and as expected. Therefore, I don't think it's a matter of OLSRd
>> > configuration. However, the Osr Dot Draw plugin is the problem, and here
>> > is
>> > configuration part for it in the olsrd.conf file:
>> >
>> > LoadPlugin "olsrd_dot_draw.so.0.3"
>> > {
>> >        PlParam "accept" "10.2.70.108"
>> >        PiParam "port"  "2004"
>> > }
>> >
>> > Any suggestions !!
>> >
>> > Thank you,
>> > Abubakr
>> >
>> >
>> >
>> >
>> > On 14 February 2015 at 19:43, Saverio Proto <(spam-protected)> wrote:
>> >>
>> >> What version of olsrd are you running ?
>> >>
>> >> When you ask a question always say which version are you running and
>> >> attach relevant config files.
>> >>
>> >> Saverio
>> >>
>> >> 2015-02-13 17:04 GMT+01:00 Abubakr Ali <(spam-protected)>:
>> >> > Hi All,
>> >> >
>> >> > Whenever I run the "./olsr-topology-mesh-lab.pl" command, everything
>> >> > works
>> >> > fine showing the network topology map. Then after a second or so, the
>> >> > command exit with the message "connection closed" while the map still
>> >> > there.
>> >> > The map doesn't change at all. It is static, i.e.: one picture one
>> >> > ImageMagick window. If I need to see the topology changes, then I
>> >> > have
>> >> > to
>> >> > run the command again. But, again, "connection closed" message and
>> >> > static
>> >> > picture of a network topology.
>> >> >
>> >> > As far as the command's help-text states, it should run for ever
>> >> > unless
>> >> > I
>> >> > stated the option "--once".
>> >> >
>> >> > does that mean it will and keep on producing images and showing it on
>> >> > ImageMagic window ? or does it mean something else ?
>> >> >
>> >> > Is there is any solution or any way that keep the ImageMagick showing
>> >> > images
>> >> > every second or two showing my network topology. Even though if the
>> >> > topology
>> >> > does not change, I am still want ImageMagick to keep showing me a new
>> >> > image
>> >> > every 1 or 2 seconds .
>> >> >
>> >> >
>> >> > Thank you
>> >> > Abubakr
>> >> >
>> >> >
>> >> > --
>> >> > Olsr-users mailing list
>> >> > (spam-protected)
>> >> > https://lists.olsr.org/mailman/listinfo/olsr-users
>> >
>> >
>
>
>
> --
> Olsr-users mailing list
> (spam-protected)
> https://lists.olsr.org/mailman/listinfo/olsr-users