[Olsr-users] Neighbors via openwrt-luci: didnt work on OLSRv1

[Ufo]

thank you, Jow was fixing that problem yesterday.
https://github.com/openwrt/luci/issues/569

Ferry, i was reading your warning already, and therefore asking..
I hope that neighbours-page in luci will also work with all very new 
plugin changes. Could anyone test that?


On 09.12.2015 17:23, Ferry Huberts wrote:
>
>
> On 09/12/15 16:35, Ufo wrote:
>> i was building a new openwrt trunk.
>> but now there is an error message instead of olsr neighbors table on 
>> luci.
>
>
> IF this means that olsrd master is used, AND that you are interfacing 
> with olsrd's JSONinfo THEN this might be correct.
>
> I changed the JSON output for neighbors.
>
> Earlier this week I already warned JSONinfo users that things were 
> changing...
>
>
> However, (see below)
>
>>
>> http://10.61.xx.yy/cgi-bin/luci//freifunk/olsr/neighbors/
>>
>> /usr/lib/lua/luci/dispatcher.lua:452: Failed to execute call 
>> dispatcher target for entry '/freifunk/olsr/neighbors'.
>> The called action terminated with an exception:
>> /usr/lib/lua/luci/controller/olsr.lua:175: attempt to index field 
>> 'iwdata' (a nil value)
>
>
> Nowhere in the source tree of olsrd is 'iwdata' mentioned.
>
> Without the output that the lua script is processing I can only 
> conclude that this is not an olsrd problem.
>
>
>
> F.
>
>> stack traceback:
>>     [C]: in function 'assert'
>>     /usr/lib/lua/luci/dispatcher.lua:452: in function 'dispatch'
>>     /usr/lib/lua/luci/dispatcher.lua:141: in function 
>> </usr/lib/lua/luci/dispatcher.lua:140>
>>
>>
>>
>> so i was opening up a ticket on openwrt/luci. maybe someone of you 
>> could fix (or test) that please!?
>> https://github.com/openwrt/luci/issues/569
>>
>>
>>
>> p.s.
>>
>> i saw that olsrd is atm at 0.9.0.3-372 and my build is olsr 0.9.0.3-1.
>> but i wasnt able to compile that with openwrt. on olsr-git there is only
>> a olsrd-stable-git package instead of olsrd. so i couldnt integrate that
>> in our meshkit/imagebuilding process
>>
>> p.p.s.
>>
>> via dmesg i see two of these errors when starting the device.. with some
>> older openwrt-firmware (and older OLSR) there is no such warning:
>>
>> Konsole output
>> [   27.277045]
>> [   27.277045] do_page_fault(): sending SIGSEGV to olsrd for invalid
>> write access to 00000000
>> [   27.285529] epc = 77140e54 in libc.so[7711a000+92000]
>> [   27.290694] ra  = 0040d42d in olsrd[400000+3b000]
>> [   27.295549]
>> [   27.592031] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>> [   27.783223] wlan0: Created IBSS using preconfigured BSSID
>> 02:44:ca:ff:ee:ee
>> [   27.790400] wlan0: Creating new IBSS network, BSSID 02:44:ca:ff:ee:ee
>> [   27.797495] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>>
>>
>>
>>
>>
>