[Olsr-users] olsr not pinging in 2 hops

[pramod Jayram]

All the devices are using the same version of olsrd 0.6.7 and using ubuntu
12.04 as operating system. I dont see any other comapatibility issues.


On Thu, Oct 16, 2014 at 10:58 AM, pramod Jayram <(spam-protected)>
wrote:

> I tried with the commands like olsrd -i wlan0 and olsrd -i wlan0 d 1 but
> still could not ping from r1 to r3 and routing table of r2 does not have
> any routes displayin. I have attached the routing table of r2
>
> On Wed, Oct 15, 2014 at 7:22 PM, pramod Jayram <(spam-protected)>
> wrote:
>
>> Hello,
>>
>>          My network  setting:
>>
>>                  two laptops L1 and L2, run with olsrd-0.6.1 version.
>>
>>                  two mesh routers R1 and R2, run with olsrd-0.5.6-r3
>> version (accompany with its openwrt OS).
>>
>>
>>                 All the laptops are in adhoc mode
>>
>> When olsrd on all the devices then
>>
>>           ping from L1 to R1, it is success.
>>           ping  from R1 to R2, it is success.
>>           ping from R2 to L2, it is success.
>>
>>          However,
>>               ping from L1 to R2, it is failed.
>>               ping from L2 to R1, it is failed.
>>
>>          Therefore, the L1 can not talk with L2.
>>
>>          Therefore, it seems my problem is that the olsrd can only talk with its direct neighbor,
>> but can not talk with nodes at two or more hops away. So is there anyone who has encountered this problem, or can anyone give me
>> some hint about how to solve this problem or bug in olsrd??
>>
>> Thanks in advance
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20141016/77445bbd/attachment.html>