[Olsr-users] olsr not pinging in 2 hops

[pramod Jayram]

I tried with the commands like olsrd -i wlan0 and olsrd -i wlan0 d 1 but
still could not ping from r1 to r3 and routing table of r2 does not have
any routes displayin. I have attached the routing table of r2

On Wed, Oct 15, 2014 at 7:22 PM, pramod Jayram <(spam-protected)> wrote:

> Hello,
>
>          My network  setting:
>
>                  two laptops L1 and L2, run with olsrd-0.6.1 version.
>
>                  two mesh routers R1 and R2, run with olsrd-0.5.6-r3
> version (accompany with its openwrt OS).
>
>
>                 All the laptops are in adhoc mode
>
> When olsrd on all the devices then
>
>           ping from L1 to R1, it is success.
>           ping  from R1 to R2, it is success.
>           ping from R2 to L2, it is success.
>
>          However,
>               ping from L1 to R2, it is failed.
>               ping from L2 to R1, it is failed.
>
>          Therefore, the L1 can not talk with L2.
>
>          Therefore, it seems my problem is that the olsrd can only talk with its direct neighbor,
> but can not talk with nodes at two or more hops away. So is there anyone who has encountered this problem, or can anyone give me
> some hint about how to solve this problem or bug in olsrd??
>
> Thanks in advance
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20141016/437cfe36/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screenshot from 2014-10-16 10:48:15.png
Type: image/png
Size: 46350 bytes
Desc: not available
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20141016/437cfe36/attachment.png>