[Olsr-users] OLSR routing issue with highly connected node

[Henning Rogge]

Can you do a look into the txtinfo output of the node?

Is the 1-hop/2-hop neighbor table okay?

I assume that the problem is somewhere in the Hello
generation/processing but I would like to be sure before going onto a
wild hunt.

Henning Rogge

On Mon, Dec 22, 2014 at 8:31 AM, Jernej Kos <(spam-protected)> wrote:
> Hello!
>
> On 21. 12. 2014 22:04, Henning Rogge wrote:
>> So you are using the normal (unmodified) olsrd code and just have
>> links which might (or might not) have a lower MTU?
>
> We are using the unmodified olsrd code, version 0.6.7.1. VPN links have
> different MTU values because our VPN tunnels perform PMTU discovery and
> adapt the tunnel MTU accordingly.
>
> To handle this on the server side, we use one bridge per MTU value (so
> VPN clients with the same MTU are all on the same bridge). And then we
> have all the bridges configured in olsrd as interfaces.
>
>
> Jernej
>