[Olsr-users] [HELP]how to use OpenWrt olsrd mesh

[楊善文]

When i use this config file, and  saw these msgs,
but still findn't problem point....
=======================================================
(spam-protected):/# olsrd -f /etc/olsrd_test.conf -d 1

 *** olsr.org -  pre-0.6.7-git_-hash_3667acb4ad7e32204039db1f6b9bc660  - ***
 Build date: 2013-06-07 11:01:53 on debian
 http://www.olsr.org

Parsing file: "/etc/olsrd_test.conf"
Plugin: olsrd_txtinfo.so.0.1
Plugin param key:"port" val: "9090"
Plugin param key:"accept" val: "0.0.0.0"
setting ifs_in_curr_cfg = 0
        IPv4 broadcast/multicast : AUTO
        Mode           : mesh
        IPv6 multicast           : ::
        HELLO emission/validity  : 0.00/0.00
        TC emission/validity     : 0.00/0.00
        MID emission/validity    : 0.00/0.00
        HNA emission/validity    : 0.00/0.00
        Autodetect changes       : no
OLSRD txtinfo plugin 0.1 by Lorenz Schori
       *** olsr.org -
pre-0.6.7-git_-hash_3667acb4ad7e32204039db1f6b9bc660  - (2013-06-07
11:01:53 on debian) ***

2013/6/10 Henning Rogge <(spam-protected)>

> On 06/10/2013 07:55 AM, 楊善文 wrote:
>
>> This is my run log, set debug = 1, but i still not see any stranger
>> msg......:(
>> ==============================
>>
>
> You are still using the OpenWRT based configuration...
>
> create a file like this:
>
>
> > LoadPlugin "olsrd_txtinfo.so.0.1"
> > {
> > PlParam         "port"  "9090"
> > PlParam         "accept"        "0.0.0.0"
> > }
> >
> > Interface "wlan0"
> > {
> > }
>
> and start olsrd directly in debug mode:
>
> > olsrd -f <filename> -d 1
>
> (-f is the command line parameter for loading a specific configuration
> file)
>
>
> Henning Rogge
>
> --
> Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
> Kommunikation, Informationsverarbeitung und Ergonomie FKIE
> Kommunikationssysteme (KOM)
> Fraunhofer Straße 20, 53343 Wachtberg, Germany
> Telefon +49 228 9435-961,   Fax +49 228 9435 685
> mailto:(spam-protected)**fraunhofer.de<(spam-protected)>
> http://www.fkie.fraunhofer.de
>
>
> --
> Olsr-users mailing list
> (spam-protected)
> https://lists.olsr.org/mailman/listinfo/olsr-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20130610/3edc7bac/attachment.html>