[Olsr-users] Finding OLSR v0.6.3-3 node with empty node table?

[Markus Kittenberger]

On Sat, Oct 6, 2012 at 1:23 PM, Ben West <(spam-protected)> wrote:

> For the past week, I've been playing around with olsrd v0.6.3-3 compiled
> from OpenWRT trunk r33537 on a mesh of four UBNT M5 devices.  Just now, I
> discovered a Bullet M5 which had (from external monitoring) apparently lost
> its default route after an automated reboot.
>
> Upon inspection locally, querying olsrd @ port 2006 returned an entirely
> empty node table, despite iw wlan0 station dump reporting very good RSSI
> with the gateway node.  Restarting olsrd on that node let the node table be
> appropriately (re)populated, and restored its route.
>
> Has this behavior been observed by others?

I would say not very often,.. but your descriptino is very generic,..

But there is the watchdog plugin, to help somehow
(infact just against olsrd main-loop hangs, which if txtinfo still worked,
you afaict did not suffer from)

But did you look for anything on the syslog?
Or did e.g. txinfo (port 2006) /interfaces reported any active olsrd
interfaces?
Which could give some hints, what olsrd's problem actually was about.

Markus

>
>
> --
> Ben West
> (spam-protected)
>
>
> --
> Olsr-users mailing list
> (spam-protected)
> https://lists.olsr.org/mailman/listinfo/olsr-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20121006/8e04cde4/attachment.html>