[Olsr-users] error in olsrd
Michel Blais
(spam-protected)
Thu Dec 20 17:03:52 CET 2012
The 2 interfaces must be in different subnet. That the way layer 3
network work.
OLSR must run on the radio and any other interface you want the route to
be propagated. You should read about layer 3 network and routing before
leaning olsr. That would be easier to do it step by step instead of
learning it all at the same time since you don't seem to really
understand what olsr should do.
Le 2012-12-20 10:40, Erdem Ulusoy a écrit :
> Hi,
>
> thank you all for your help. When setting OLSR, i give one IP for OLSR
> interface and another IP for the lan interface. Is it something
> correct? (The IP's are in the same network)
> I can ping the IP's assigned for the OLSR interface (when I run the
> command "/etc/init.d/olsrd start", so I think I am on the right way)
> but I can't ping the other IP's. How can I fix this? If you want to
> see any config file (network, wireless, olsrd, firewall...) I can sent it.
>
> See you;
> Erdem
>
>
> On Wed, Dec 19, 2012 at 7:05 PM, Michel Blais
> <(spam-protected) <mailto:(spam-protected)>> wrote:
>
> Also, list interface should be follwed by the UCI interface name
> so make sure your interface name in /etc/config/network is wlan0
> and wlan1
>
> Exemple, if in /etc/config/network, you configure it like this:
>
> config 'interface' 'mywirelesslink'
> option 'ifname' 'wlan0'
>
> then your interface name in /etc/config/olsrd will be
> list interface 'mywirelesslink'
>
> Michel
>
> Le 2012-12-19 11:57, Michel Blais a écrit :
>> OpenWRT will generate the olsrd.conf under /tmp/etc/olsrd.conf
>>
>> The option :
>>
>> config Interface
>> list interface 'wlan0-1'
>>
>> is wrong, it will generate olsrd.conf as :
>>
>> Interface "wlan0-1"
>> {
>> }
>>
>> It should be :
>> list interface 'wlan0 wlan1'
>>
>> Michel
>>
>> Le 2012-12-19 11:50, Erdem Ulusoy a écrit :
>>> Also there is one more point, I want to ask. I can't add the
>>> interface that I am using Olsr to the lan bridge with the brctl
>>> command. Is it sth normal or will I be able to add that
>>> interface to the bridge when Olsr works?
>>>
>>> Thanks
>>>
>>>
>>> On Wed, Dec 19, 2012 at 6:26 PM, Henning Rogge
>>> <(spam-protected) <mailto:(spam-protected)>> wrote:
>>>
>>> That is the OpenWRT File... Olsr cannot parse this at all, its
>>> converted by OpenWRT scripts to the olsrd.conf file.
>>>
>>> If you think that OpenWRT puts the wrong interfaces into
>>> this file,
>>> there is nothing we can do about it and you will have to ask
>>> on the
>>> OpenWRT mailing list.
>>>
>>> Henning Rogge
>>>
>>> On Wed, Dec 19, 2012 at 5:14 PM, Erdem Ulusoy
>>> <(spam-protected) <mailto:(spam-protected)>>
>>> wrote:
>>> > Thank you Henning my olsrd.conf file is as follows (it is
>>> located as
>>> > /etc/config/olsrd);
>>> >
>>> > config olsrd
>>> > # uncomment the following line to use a custom
>>> config file instead:
>>> > #option config_file '/etc/olsrd.conf'
>>> >
>>> > option IpVersion '4'
>>> >
>>> > config LoadPlugin
>>> > option library 'olsrd_arprefresh.so.0.1'
>>> >
>>> > config LoadPlugin
>>> > option library 'olsrd_dyn_gw.so.0.5'
>>> >
>>> > config LoadPlugin
>>> > option library 'olsrd_httpinfo.so.0.1'
>>> > option port '1978'
>>> > list Net '0.0.0.0 0.0.0.0'
>>> >
>>> > config LoadPlugin
>>> > option library 'olsrd_nameservice.so.0.3'
>>> >
>>> > config LoadPlugin
>>> > option library 'olsrd_txtinfo.so.0.1'
>>> > option accept '0.0.0.0'
>>> >
>>> > config Interface
>>> > list interface 'wlan0-1'
>>> >
>>> > I don't have any file located as /etc/olsrd.conf, I think
>>> the file I sent
>>> > you is the default one.
>>> >
>>> >
>>> > On Wed, Dec 19, 2012 at 6:02 PM, Henning Rogge
>>> <(spam-protected) <mailto:(spam-protected)>>
>>> > wrote:
>>> >>
>>> >> Hi,
>>> >>
>>> >> that sounds like a problem in the OpenWRT script that
>>> generates your
>>> >> configuration. Maybe you should ask the OpenWRT Team
>>> about this?
>>> >>
>>> >> Otherwise you can post your olsrd.conf and we can take a
>>> look at it.
>>> >>
>>> >> Henning Rogge
>>> >>
>>> >> On Wed, Dec 19, 2012 at 4:57 PM, Erdem Ulusoy
>>> <(spam-protected) <mailto:(spam-protected)>>
>>> >> wrote:
>>> >> > Hi All,
>>> >> >
>>> >> > I want to run olsrd on Tp-Link TL-WDR4300 which has
>>> Atheros wi-fi card
>>> >> > on
>>> >> > it. I compiled it using OpenWrt and olsrd version
>>> pre-0.6.6.
>>> >> > When I run the command /etc/init.d/olsrd start, it says
>>> "Warning:
>>> >> > Invalid
>>> >> > value in option 'olsrd.cfg0e4d76.interface', skipped".
>>> In my opinion, it
>>> >> > is
>>> >> > because in Broadcom cards, wireless interface is called
>>> as wifi but in
>>> >> > my
>>> >> > card it is called as wlan. How can I fix this? Please
>>> help me.
>>> >> >
>>> >> > Thank you in advance;
>>> >> > Erdem
>>> >> >
>>> >> > --
>>> >> > Olsr-users mailing list
>>> >> > (spam-protected)
>>> <mailto:(spam-protected)>
>>> >> > https://lists.olsr.org/mailman/listinfo/olsr-users
>>> >>
>>> >>
>>> >>
>>> >> --
>>> >> Steven Hawkings about cosmic inflation: "An increase of
>>> billions of
>>> >> billions of percent in a tiny fraction of a second. Of
>>> course, that
>>> >> was before the present government."
>>> >
>>> >
>>>
>>>
>>>
>>> --
>>> Steven Hawkings about cosmic inflation: "An increase of
>>> billions of
>>> billions of percent in a tiny fraction of a second. Of
>>> course, that
>>> was before the present government."
>>>
>>>
>>>
>>>
>
> --
> Olsr-users mailing list
> (spam-protected) <mailto:(spam-protected)>
> https://lists.olsr.org/mailman/listinfo/olsr-users
>
>
>
>
--
Cordialement,
Best regards,
Michel Blais
Administrateur réseau / Network administrator
Targo Communications
www.targo.ca
514-448-0773
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20121220/10699ba7/attachment.html>
More information about the Olsr-users
mailing list