[Olsr-users] error in olsrd

[Erdem Ulusoy]

One more thing I forgot to say, I want to run AP interface and OLSR on the
same radio, I think it is completely OK (except reduction in bw) isn't it?


On Thu, Dec 20, 2012 at 5:40 PM, Erdem Ulusoy <(spam-protected)>wrote:

> Hi,
>
> thank you all for your help. When setting OLSR, i give one IP for OLSR
> interface and another IP for the lan interface. Is it something correct?
> (The IP's are in the same network)
> I can ping the IP's assigned for the OLSR interface (when I run the
> command "/etc/init.d/olsrd start", so I think I am on the right way) but I
> can't ping the other IP's. How can I fix this? If you want to see any
> config file (network, wireless, olsrd, firewall...) I can sent it.
>
> See you;
> Erdem
>
>
> On Wed, Dec 19, 2012 at 7:05 PM, Michel Blais <(spam-protected)>wrote:
>
>>  Also, list interface should be follwed by the UCI interface name so
>> make sure your interface name in /etc/config/network is wlan0 and wlan1
>>
>> Exemple, if in /etc/config/network, you configure it like this:
>>
>> config 'interface' 'mywirelesslink'
>>     option 'ifname' 'wlan0'
>>
>> then your interface name in /etc/config/olsrd will be
>> list interface 'mywirelesslink'
>>
>> Michel
>>
>> Le 2012-12-19 11:57, Michel Blais a écrit :
>>
>> OpenWRT will generate the olsrd.conf under /tmp/etc/olsrd.conf
>>
>> The option :
>>
>> config Interface
>> list interface 'wlan0-1'
>>
>> is wrong, it will generate olsrd.conf as :
>>
>> Interface "wlan0-1"
>> {
>> }
>>
>> It should be :
>> list interface 'wlan0 wlan1'
>>
>> Michel
>>
>> Le 2012-12-19 11:50, Erdem Ulusoy a écrit :
>>
>> Also there is one more point, I want to ask. I can't add the interface
>> that I am using Olsr to the lan bridge with the brctl command. Is it sth
>> normal or will I be able to add that interface to the bridge when Olsr
>> works?
>>
>>  Thanks
>>
>>
>> On Wed, Dec 19, 2012 at 6:26 PM, Henning Rogge <(spam-protected)>wrote:
>>
>>> That is the OpenWRT File... Olsr cannot parse this at all, its
>>> converted by OpenWRT scripts to the olsrd.conf file.
>>>
>>> If you think that OpenWRT puts the wrong interfaces into this file,
>>> there is nothing we can do about it and you will have to ask on the
>>> OpenWRT mailing list.
>>>
>>> Henning Rogge
>>>
>>> On Wed, Dec 19, 2012 at 5:14 PM, Erdem Ulusoy <(spam-protected)>
>>> wrote:
>>> > Thank you Henning my olsrd.conf file is as follows (it is located as
>>> > /etc/config/olsrd);
>>> >
>>> > config olsrd
>>> >         # uncomment the following line to use a custom config file
>>> instead:
>>> >         #option config_file '/etc/olsrd.conf'
>>> >
>>> >         option IpVersion '4'
>>> >
>>> > config LoadPlugin
>>> >         option library 'olsrd_arprefresh.so.0.1'
>>> >
>>> > config LoadPlugin
>>> >         option library 'olsrd_dyn_gw.so.0.5'
>>> >
>>> > config LoadPlugin
>>> >         option library 'olsrd_httpinfo.so.0.1'
>>> >         option port '1978'
>>> >         list Net '0.0.0.0 0.0.0.0'
>>> >
>>> > config LoadPlugin
>>> >         option library 'olsrd_nameservice.so.0.3'
>>> >
>>> > config LoadPlugin
>>> >         option library 'olsrd_txtinfo.so.0.1'
>>> >         option accept '0.0.0.0'
>>> >
>>> > config Interface
>>> >         list interface 'wlan0-1'
>>> >
>>> > I don't have any file located as /etc/olsrd.conf, I think the file I
>>> sent
>>> > you is the default one.
>>> >
>>> >
>>> > On Wed, Dec 19, 2012 at 6:02 PM, Henning Rogge <(spam-protected)>
>>> > wrote:
>>> >>
>>> >> Hi,
>>> >>
>>> >> that sounds like a problem in the OpenWRT script that generates your
>>> >> configuration. Maybe you should ask the OpenWRT Team about this?
>>> >>
>>> >> Otherwise you can post your olsrd.conf and we can take a look at it.
>>> >>
>>> >> Henning Rogge
>>> >>
>>> >> On Wed, Dec 19, 2012 at 4:57 PM, Erdem Ulusoy <
>>> (spam-protected)>
>>> >> wrote:
>>> >> > Hi All,
>>> >> >
>>> >> > I want to run olsrd on Tp-Link TL-WDR4300 which has Atheros wi-fi
>>> card
>>> >> > on
>>> >> > it. I compiled it using OpenWrt and olsrd version pre-0.6.6.
>>> >> > When I run the command /etc/init.d/olsrd start, it says "Warning:
>>> >> > Invalid
>>> >> > value in option 'olsrd.cfg0e4d76.interface', skipped". In my
>>> opinion, it
>>> >> > is
>>> >> > because in Broadcom cards, wireless interface is called as wifi but
>>> in
>>> >> > my
>>> >> > card it is called as wlan. How can I fix this? Please help me.
>>> >> >
>>> >> > Thank you in advance;
>>> >> > Erdem
>>> >> >
>>> >> > --
>>> >> > Olsr-users mailing list
>>> >> > (spam-protected)
>>> >> > https://lists.olsr.org/mailman/listinfo/olsr-users
>>> >>
>>> >>
>>> >>
>>> >> --
>>> >> Steven Hawkings about cosmic inflation: "An increase of billions of
>>> >> billions of percent in a tiny fraction of a second. Of course, that
>>> >> was before the present government."
>>> >
>>> >
>>>
>>>
>>>
>>> --
>>> Steven Hawkings about cosmic inflation: "An increase of billions of
>>> billions of percent in a tiny fraction of a second. Of course, that
>>> was before the present government."
>>>
>>
>>
>>
>>
>> --
>> Olsr-users mailing list
>> (spam-protected)
>> https://lists.olsr.org/mailman/listinfo/olsr-users
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20121220/b31000f2/attachment.html>