[Olsr-users] error in olsrd

[Erdem Ulusoy]

Also there is one more point, I want to ask. I can't add the interface that
I am using Olsr to the lan bridge with the brctl command. Is it sth normal
or will I be able to add that interface to the bridge when Olsr works?

Thanks


On Wed, Dec 19, 2012 at 6:26 PM, Henning Rogge <(spam-protected)>wrote:

> That is the OpenWRT File... Olsr cannot parse this at all, its
> converted by OpenWRT scripts to the olsrd.conf file.
>
> If you think that OpenWRT puts the wrong interfaces into this file,
> there is nothing we can do about it and you will have to ask on the
> OpenWRT mailing list.
>
> Henning Rogge
>
> On Wed, Dec 19, 2012 at 5:14 PM, Erdem Ulusoy <(spam-protected)>
> wrote:
> > Thank you Henning my olsrd.conf file is as follows (it is located as
> > /etc/config/olsrd);
> >
> > config olsrd
> >         # uncomment the following line to use a custom config file
> instead:
> >         #option config_file '/etc/olsrd.conf'
> >
> >         option IpVersion '4'
> >
> > config LoadPlugin
> >         option library 'olsrd_arprefresh.so.0.1'
> >
> > config LoadPlugin
> >         option library 'olsrd_dyn_gw.so.0.5'
> >
> > config LoadPlugin
> >         option library 'olsrd_httpinfo.so.0.1'
> >         option port '1978'
> >         list Net '0.0.0.0 0.0.0.0'
> >
> > config LoadPlugin
> >         option library 'olsrd_nameservice.so.0.3'
> >
> > config LoadPlugin
> >         option library 'olsrd_txtinfo.so.0.1'
> >         option accept '0.0.0.0'
> >
> > config Interface
> >         list interface 'wlan0-1'
> >
> > I don't have any file located as /etc/olsrd.conf, I think the file I sent
> > you is the default one.
> >
> >
> > On Wed, Dec 19, 2012 at 6:02 PM, Henning Rogge <(spam-protected)>
> > wrote:
> >>
> >> Hi,
> >>
> >> that sounds like a problem in the OpenWRT script that generates your
> >> configuration. Maybe you should ask the OpenWRT Team about this?
> >>
> >> Otherwise you can post your olsrd.conf and we can take a look at it.
> >>
> >> Henning Rogge
> >>
> >> On Wed, Dec 19, 2012 at 4:57 PM, Erdem Ulusoy <(spam-protected)>
> >> wrote:
> >> > Hi All,
> >> >
> >> > I want to run olsrd on Tp-Link TL-WDR4300 which has Atheros wi-fi card
> >> > on
> >> > it. I compiled it using OpenWrt and olsrd version pre-0.6.6.
> >> > When I run the command /etc/init.d/olsrd start, it says "Warning:
> >> > Invalid
> >> > value in option 'olsrd.cfg0e4d76.interface', skipped". In my opinion,
> it
> >> > is
> >> > because in Broadcom cards, wireless interface is called as wifi but in
> >> > my
> >> > card it is called as wlan. How can I fix this? Please help me.
> >> >
> >> > Thank you in advance;
> >> > Erdem
> >> >
> >> > --
> >> > Olsr-users mailing list
> >> > (spam-protected)
> >> > https://lists.olsr.org/mailman/listinfo/olsr-users
> >>
> >>
> >>
> >> --
> >> Steven Hawkings about cosmic inflation: "An increase of billions of
> >> billions of percent in a tiny fraction of a second. Of course, that
> >> was before the present government."
> >
> >
>
>
>
> --
> Steven Hawkings about cosmic inflation: "An increase of billions of
> billions of percent in a tiny fraction of a second. Of course, that
> was before the present government."
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20121219/67f53216/attachment.html>