[Olsr-users] Anyone with verified 802.11n HT speeds on Ubiquiti M devices in adhoc/mesh mode?

[Antonio Anselmi]

...moreover, backfire doesn't allow one VAP in adhoc/mesh + a second
VAP as AP (was possible in backfire branch r22673).

Antonio

2011/3/14 Ben West <(spam-protected)>:
> I just set up 3 Ubiquiti M5 devices as mesh nodes running OpenWRT 10.0.3-rc4
> + OLSR 0.6 meshing, and with 802.11s layer 2 meshing.  Working at 20Mbit/s
> between repeater and gateway, somewhat less when further than 1 hop away
> from gateway.  I've apparently not been able to get HT modes (i.e. 40MHz
> channels) to work, which may be a limitation of ath9k driver in OpenWRT
> Backfire.
> More info here:
> https://forum.openwrt.org/viewtopic.php?pid=130683#p130683
> The lack of HT mode support in ad-hoc mode for OpenWRT Backfire appears to
> be confirmed by these patches for precisely that feature to
> compat-wireless-2011-01-17 package:
> http://www.spinics.net/lists/linux-wireless/msg62995.html
> http://ns3.spinics.net/lists/linux-wireless/msg50200.html
> Has anyone tried these out?
> --
> Ben West
> (spam-protected)
>
> --
> Olsr-users mailing list
> (spam-protected)
> http://lists.olsr.org/mailman/listinfo/olsr-users
>