[Olsr-users] About sending data on adhoc

√Črico Porto (spam-protected)
Mon Aug 1 01:58:26 CEST 2011


This means that all data sent in this OLSRd network will use the routes
provided - unless you force otherwise.

√Črico V. Porto


On Sat, Jul 30, 2011 at 12:09 PM, Henning <(spam-protected)> wrote:

> On Saturday 30 July 2011 16:57:50 Yanni wrote:
> > Hi,
> >      Maybe this is not all about olsrd,but it is really makes me
> > confused.Olsrd only sends and receives Hellos and TCs,but not data
> > packets,and it sets entries in the kernel route table.I wonder OS in the
> > middle would transmit packets accordingly.Or else i have to make
> > transmitting myself.
> >
> >  So how should I send data packets?
> Like you said, Olsrd use Hellos/TCs to calculate the topology of your mesh
> and
> then setup routes in the local OS for the next hop. Which also runs OLSRd,
> so
> it also has routes for the next hop...
>
> Each node gets a complete routing table for each of the other nodes of the
> mesh, in which it can find the next hop for them.
>
> Thats all which is needed to transmit the data (hop by hop) towards the
> target.
>
> Henning Rogge
>
> --
> Olsr-users mailing list
> (spam-protected)
> https://lists.olsr.org/mailman/listinfo/olsr-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20110731/1ce21bdd/attachment.html>


More information about the Olsr-users mailing list