[Olsr-users] How to apply LinkQualityMult or Mode for very high speed wireless I/F?

[ZioPRoTo (Saverio Proto)]

> Ideally, I would like OLSR to build multi-hop routes between nodes with high
> connection speeds, e.g. 150Mbit/s vs 60Mbit/s.  However, the only way I get
> get such link info is using the iw command line tool, e.g.

we do have the exactly the same problem in Ninux.org Rome Network.

we are using AirOS + olsrd, with your same configuration. We have
little packet loss, but the difference is on the total bandwidth
available to the links.

I think the solution is a new metric not based on packet loss. However
we don't have yet a ready solution for this.

Let's keep in touch on this mailing list, if any of us have good news
let's share them.

(I would also suggest the solution should not be Linux/OpenWRT
specific, but should be completely handled by the routing daemon)

Saverio