[Olsr-users] routing problem in my mesh router

[Sven-Ola Tuecke]

Hello Sutrisno

if the other routers run fine there may be a hardware problem. Here's a 
checklist:

- The "todo-List" on the Admin-Page shows all green? No red-X?
- SSH-login to your meshbox2. Enter "arping -I eth1 102.168.10.1".
  Any answer: ip configuration of meshbox1 is wrong.
  No answer: no wifi-connection. check wifi settings on meshbox2
- SSH-login to your blind meshbox1. Type "cat /proc/net/wireless".
  This shows the wifi device, e.g.

(spam-protected):~# cat /proc/net/wireless
Inter-| sta-|   Quality        |   Discarded packets               | Missed 
| WE
 face | tus | link level noise |  nwid  crypt   frag  retry   misc | beacon 
| 16
  eth1: 0000    0     1     0        0      0      0      2      0        0

Wifi is shown: Double check wifi config, e.g. type "wl status"
Wifi not shown: Wireless driver does not load. Try "insmod wl" and check 
with "dmesg"

HTH
// Sven-Ola

"tris sutrisno" <(spam-protected)> schrieb im Newsbeitrag 
news:(spam-protected)
Hi...

I need your help..

This is my first time to work on wireless mesh router, I am using wrt54gl 
for my mesh router running olsr. I have four wrt54gl router that I have 
already flashed with freifunk firmware. The problem is that one out of four 
routers is not listenning to its neighbours. I noticed this problem when I 
run my olsr switch in my laptop. When I access one of the four router for 
instance so called meshbox2 (192.168.10.2) The router called mesbox1 with ip 
address 192.168.10.1 is not shown in the neighbour list on the status of the 
freifunk page. And also It is not available in MPR list in my olsr switch. 
But I can still access the meshbox1 using SSH putty. So what shoul I do ?, 
please give me assistance to this problem..thank you

Regards,
Sutrisno