[Olsr-users] olsrd taking long time to start up

[Markus Kittenberger]

there might be some errors that cause some delays (as they print error
messages on stdout at startup),.. but if u do not have 10 interfaces olsrd
should run on, it will never need 5 minutes,..

btw. what is your interpretation of olsrd startup finished:
that olsrd sends out its first packet, or that "all" routes are established
?

to debug this try to do similar in your etc/init.d/olsrd

replace olsrd [xyz]

with

date > /tmp/olsrd.log
olsrd [xyz] -nofork > /tmp/olsrd.log 2>&1

but you should kill this olsrd (and review the logfile) until it used up all
of your /tmp storage space (i.e. probably your routers memory)

regards Markus

On Fri, May 14, 2010 at 12:03 PM, Monali Bhattacharya <
(spam-protected)> wrote:

> Hi, I've installed olsrd in the Openwrt platform. When I run the
> application manually it is starting instantly but if i run the application
> at the time of boot with the command /etc/init.d/olsrd enable it is taking
> more than 5 mins to start up. Can anyone guide what may be the cause of the
> delay and how to solve the problem.
>
> Thanks
>
>
>
>
> Larsen & Toubro Limited
> www.larsentoubro.com
>
> This Email may contain confidential or privileged information for the
> intended recipient (s) If you are not the intended recipient, please do not
> use or disseminate the information, notify the sender and delete it from
> your system.
>
>
> --
> Olsr-users mailing list
> (spam-protected)
> http://lists.olsr.org/mailman/listinfo/olsr-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20100514/0504e1ee/attachment.html>