[Olsr-users] Just one IP from the interface

[Gioacchino Mazzurco]

yes the same as I told

2010/6/8 Henning Rogge <(spam-protected)>

> Am Montag 07 Juni 2010, 23:45:05 schrieb Mitar:
> > Hi!
> >
> > On Mon, Jun 7, 2010 at 10:58 PM, Markus Kittenberger
> >
> > <(spam-protected)> wrote:
> > > so just do it like this! *G
> > >
> http://olsr.org/git/?p=olsrd.git;a=blob;f=files/olsrd.conf.default.full;h
> > > =11d495bb84539f5d336184fabce5a7e18631eabd;hb=stable#l477 Markus
> >
> > And then not all IPs from the interface will be used if I specify only
> > one with IPv4Src?
> I have problems to get the same result as you.
>
> If I have an interface with two IPs in the olsrd.conf, olsrd will only add
> a
> route to ONE of this IPs, not both of them.
>
> If you want to run two seperate address ranges on you LAN port, just add a
> new
> alias interface (eth0:olsr for example) with an mesh-IP to the LAN and run
> OLSRd on it. You might want to use the IPv4Src option to set OLSRs src-ip
> for
> OLSR packets fixed to this address too.
>
> Henning
>
> --
> 1) You can't win.
> 2) You can't break even.
> 3) You can't leave the game.
> — The Laws of Thermodynamics, summarized
>
> --
> Olsr-users mailing list
> (spam-protected)
> http://lists.olsr.org/mailman/listinfo/olsr-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20100608/4daf16b1/attachment.html>