[Olsr-users] OpenWRT OLSR on one of the Lan Ports

[Markus Kittenberger]

just configure olsr to your lan interface as you did with your wireless
interface,..

regards Markus

On Sun, Feb 7, 2010 at 6:15 AM, Kipton Moravec <(spam-protected)> wrote:

> I have OLSR running on my Linksys WRT54G with OpenWRT.
>
> How do I make OLSR information go out the LAN port and link to another
> router LAN port like it was an RF hop?
>
> There are two reasons I need to do this.
>
> First, I need to be able to change frequency channels. So Router one is
> on channel 1 and router two is on channel 6 but I want them to be on the
> same mesh.
>
> Second I may want to use a ethernet wire to connect a router on the
> north side of a tall building with one on the south side, but the
> building prevents them from connecting together via RF.
>
> Third, I have some point-to-point 5.2 GHz units with good size dishes,
> and would like to extend the mesh to another area before it is filled in
> with mesh nodes.
>
> Does anyone have an example, or instructions of how this is configured?
>
> Kip
> --
> Kipton Moravec AE5IB .- . ..... .. -...
>
> "Always do right; this will gratify some people and astonish the rest."
> --Mark Twain
>
>
>
> --
> Olsr-users mailing list
> (spam-protected)
> http://lists.olsr.org/mailman/listinfo/olsr-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20100207/a2becc39/attachment.html>