[Olsr-users] OLSR Gateway & HNA Question

[Henning Rogge]

Am Friday 16 January 2009 14:01:56 schrieb Bhat, Ishwara:
> Hi,
>
> I am continuing an old thread. Please answer my question below on HNA
> configuration.
>
> "" usually, you have that case when you run dhcp on your wireless interface
> while running olsrd on the same wireless interface.
>
> so you have to announce the range of you dhcp-server per HNA to announce
> the route back.
> if your dhcp range is outside of the iprange used in the mesh network,
> you might need an alias ip and and a resulting netroute to that
> interface.""
You can announce any kind of address in an HNA. Of course the IP of the router 
itself must be a "olsr net ip".
>
> You are saying that we can provide a range of addresses within the same
> network number in HNA entry? How do we do that ?
>
> I checked the olsr.conf we have provision to give only a network address,
> not any range of addresses.
You can use a HNA like this:

Hna4
{
   192.168.1.0  255.255.255.0
}

This will announce the addresses 192.168.1.0 to 192.168.1.255.

> I also checked hna_set.c and the header. The structures there do not seem
> to indicate that possibility.

Henning

*************************************************
Diplom Informatiker Henning Rogge
Forschungsgesellschaft für
Angewandte Naturwissenschaften e. V. (FGAN) 
Neuenahrer Str. 20, 53343 Wachtberg, Germany
Tel.: 0049 (0)228 9435-961
Fax: 0049 (0)228 9435-685
E-Mail: (spam-protected)
Web: www.fgan.de
************************************************
Sitz der Gesellschaft: Bonn
Registergericht: Amtsgericht Bonn VR 2530
Vorstand: Dr. rer. nat. Ralf Dornhaus (Vors.), Prof. Dr. Joachim Ender 
(Stellv.)

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 197 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20090116/29b94dcf/attachment.sig>