[Olsr-users] AHCP

[Outback Dingo]

though lets clarify ROBIN is for atheros based devices so we all know
where this logic should work on broadcom devices also

On Wed, Feb 25, 2009 at 1:56 PM, Antonio Anselmi
<(spam-protected)>wrote:

> this firmware is already in field: ROBIN open-mesh
> (http://www.open-mesh.com)
>
> It's a 0-config firmware builded on top of Openwrt, it offers the
> ability to chose batman or olsr, ability to have captive portals
> (nodogsplash, chilli, coovaAAA, coova-OM, sputnik,...), dashboard
> oriented (it's supported by open-mesh and orange dashboard) and many
> other features.
>
> We have tens of thousands nodes deployed and managed directly by
> end-users and telco companies.
>
> Firmware is still under heavy development.
>
> Antonio
>
> On Wed, February 25, 2009 3:00, Derek C said:
> > Hi Robert,
> >
> > I was wondering it is [easily] possible to make a standard firmware
> > that,
> > once flashed, would start to work without having to modify any
> > settings.
> >
> > Currently I modify the IP address each and every time after I've
> > flashed
> > openwrt on to the units.  It would be nice to be able to avoid this as
> > its
> > work and a point where I'll botch it up :)
> >
> > I would think you are right about not being able to make a unique IP
> > based
> > on the MAC with IPV4 - even for a /8 network that would be only three
> > bytes and three bytes in a MAC are bound to duplicate.
> >
> > thanks though!,
> >
> > Derek
> >
> >
> > --
> > Derek C
> > In Ireland
> >
> >
> >
> > --
> > Olsr-users mailing list
> > (spam-protected)
> > http://lists.olsr.org/mailman/listinfo/olsr-users
> >
>
>
>
> --
> Olsr-users mailing list
> (spam-protected)
> http://lists.olsr.org/mailman/listinfo/olsr-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.olsr.org/pipermail/olsr-users/attachments/20090225/51a9450b/attachment.html>